ZKTeco biocam series Installation Manual
-1- -2-Precautions DO NOT connect cables when the power is on. Working ConditionsOperating temperature: -10 ºC ~50 ºC. Operating humidity: 10% ~80%. Communication DistanceWhen communication distance exceeds 80 meters, please use relay device.(Remarks: under the POE [Optional] mode, if transmission distance is greater than 60meters, please use a repeater.) Keep the lens clean. If the lens is too dirty, use a tidy and soft cloth to clean the lens. Do not point the camera against an object emitting strong light for a long time.Otherwise, the image sensor of the camera may malfunction, which leads to absence ordistortion of images.Tips: The product is applicable only to indoor installation. Do not install the deviceoutdoors or semi-outdoor; otherwise, the warranty is not granted. Power RequirementThe power must be DC 12V, rated current >= 1.5 A. All uncovered cable should be less than 5mm, to avoid exceptional device damage.Recommended horizontal distance from the user to face recognition camera is about 3meters. (Applied to height range 1.5~1.9m) Suggest ConditionInstall the device indoors; stay away from and back to the window and the door; and 6.5 feet(2m) away from light fixtures. Preferable light intensity should range between 0~300 Lux.(Note: The installation and the use environment; please refer to the Application Guide.) The area in which face recognition can be implemented is defined as follows: theleft-to-right distance is about 0.35 m, and the front-to-rear distance is about 1 m. (For details,see Appendix > Face Recognition Area) Installing positions that affect the use effect of the device Reference luminance of the light source in the installation environment10 Lux 1200+ Lux 50~300 LuxChapter 1: The Installation of Device1. Install Device Wall MountingBIOCAM Series Product Installation GuideVersion: 1.2 Date: July 20141. Attach the installation template to the wall where you want to mount the camera and drill holes. (It is recommended to install thedevice at a height of 2.2 m; according to needs, you can adjust it to 2~2.4 meters)2. Fix the camera on the wall using four screws. (The device can be rotated left to right so that screws can be conveniently fastened.)1. Connect the steeve to the device2. Attach the steeve mounting paper onto the wall or ceiling where the device will be installed. Drill holes according to marks on thesteeve mounting paper3. Use screws to fix the steeve4. Adjust the length of the steeve to ensure that the Face Recognition Camera is 2.2 meters off the ground. (Note: according toneeds, you can adjust it to 2~2.4 meters.Note: The steeve is not included in the standard configuration. The device supports three types of steeves that arerespectively 40~80 cm, 80~160 cm, and 140~250 cm (Floor Standing). Top MountingInstallation ModeNO. Description Note1 Use the standard wall-mount bracket that comes with the device.2 Use a 40 to 80 cm ceiling-mount bracket instead of the standardbracket that comes with the device.The 40 to 80 cm bracket is applicable to thestorey height of 2.6 to 3.4 m.3 Use an 80 to 160 cm ceiling-mount bracket instead of thestandard bracket that comes with the device.The 80 to 160 cm bracket is applicable to thestorey height of 3.4 to 4.2 m.4 Use a 140 to 250 cm floor-mount bracket. Fix the bracket on the floor, and fix the device onthe bracket. |
Related manuals for ZKTeco biocam series
ZKTeco FC700 Installation Manual
ZKTeco ZKSD4 Series User Manual
ZKTeco 8000 Series User Manual
ZKTeco 8000 Series User Manual
ZKTeco PS-55B Series User Manual
ZKTeco C9AP Series Quick Start Manual
ZKTeco C4FS Series Quick Start Manual
ZKTeco FC700 Configuration Manual
ZKTeco MD532 Manual
ZKTeco ZN-T1 User Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine