Zemgo ZEM-1000 User Manual
 |
ZEM-1000 / ZEM-1001 / ZEM-1002Smart Home WiFi SecurityAlarm ReceiverUser Manualwww.zemgoalarms.comSmart Alarm Alexa Skill User GuideHow to make my Smart Alarm work withAmazon Echo/Tap/Dot?Before we start, we need to make sure that you have a Smart Alarm and it isconnected to Wi-Fi, please make sure that you have completed the steps on page3, 4 and 5 before you sync the Zemgo hub to Amazon Alexa.Step 1: Download and install AmazonAlexa App to your smartphone.Step 2: Log in the Amazon Alexa APPusing your Amazon account.Step 3: Use the hamburger menu icon to go into the Skill page.Step 4: Search “Smart Alarm” in the search bar to enable theSSG Smart Alarm Skill.Step 6: Tap “Grant” to link your Smart Alarm with your Amazon Alexa account, onceyour accounts have been linked succesfully, you should see a success screen, nowyou can start controllling the Smart Alarm with Echo/Tap/Dot using voice command,such as:“Alexa, tell Blue Dog to arm please”Definition: This allows you to arm the system using voice control.You can also get theSN by long pressingthe device on the maincontrol page of theZemguard App,then tap“Copy the SN” on thepop-up menu.Step 5: Enter your SmartAlarm’s SN and Passwordin the pop up window andtap “Sign In”. The SN ofyour Zemgo Device is thesame as the Device nameshown on page 4 Fig. 3.General InformationThe WIFI-enabled smart hub could be used for security alarm, elder care,and wireless doorbell. It allows you to get updates and change setting withsmartphone anytime anywhere.Main FeaturesWIFI-enabled cloud security alarm systemApp-based control and monitoringKnow exact sensor that triggered in secondsPlug and play, easy setup in less than ten minutesChange setting and get live updates from miles awayView the entire system or a single sensor anywhere anytimeEasy to remove and take with youBuilt-in strobe siren, 80 decibels of volumeCustomize your system, expandable, supports up to 50 wirelessaccessoriesCustomizable alert for each sensorMore than just an alarm system, doorbell and video monitoring areoptionalZEM-1000 / ZEM1001 / ZEM-1002System OverviewTurn ON AP mode:Press the button for 5s, the hub will come with a continuous beepingsound, blue light flash, then the WIFI hot spot is opened.And then connect your cellphone to the WIFI hotspot namedSa****, the default password is 12345678.Turn ON pairing mode/Reset:Turn on paring mode:Short press this button to turn ON pairing mode.Reset: Long press the button until 2 beeps heard.Long press the button to turn on/off the machine.AC plugVoltage: AC110~240V; EU, US, UK, AU plug optionalLED lighting definitions:Arm: The red light is on alwaysDisarm: The red light is offBypass: (Home mode) the pink light blinking slowlyWIFI connection successful: Blue light onWIFI connection is invalid: Blue light quick blinkingThe hub is connected to serve: Blue light flashes once every 5sAlarming: Pink light blinking and buil-in siren hootingZemguardAPP DownloadScan the QR codes below or search the keyword “Zemguard” onAPP store for IOS or “Zemguard” on Google Play for Android to downloadthe APP.APP and Smart Alarm pairing1. Power on the smart alarm hub.2. Turn on AP mode by long pressing button , when the blue lightis quick blinking and the siren is beeping, it is under AP mode. Shortpress button to exit AP mode.3. Find the WIFI hotspot that starts with “SAxxx” in your mobile phoneWIFI list to connect to the hub, the default password is 12345678, APmode will be on for 5 minutes and exit automatically.Pairing/activate the Door / Window Contact (ZEM-1004)1. Please make sure you have both pieces of the door / Window contact closetogether. (Fig. C)2. Now you should separate both pieces of the Door / Window contact until yousee a blue light from the contact and it will be followed by a beeping sound fromthe hub, this indicates that you have successfully paired the contact. (Fig. D)AccessoriesRemote Control (ZEM-1006)The remote control is easy to carry, it can be used to set the system toArm/Disarm/Home or activate an alarm at touch of the SOS button.You can also remote arm/disarm/bypass the system using smartphoneAPP.Note: the gap between the transmitter and magnet should less than 1cmTroubleshooting1. The smart hub doesn’t respond to APP operation.a) Check whether the local network is working.b) Make sure the smartphone is connected to internet.2. Remote control doesn’t work.a) Check if the remote control has been paired to the smart hubb) The distance between the smart hub and remote control is too far away.3. Smart hub can’t respond to sensor/detector.a) Check whether the system is armedb) Check if the sensor/detector has been paired to the smart hub.c) Check if the sensor/detector is far away from the smart hub.3. Fail to connect the smart hub to router.a) Make sure the smart hub is under AP mode and your smartphone isconnected to the smart hub during WIFI setting.b) Reset the smart hub and try again.SpecificationsSmart Alarm HubThe “brain” of the system, with sound & flash, get a live updates andchange setting anytime anywhere.Operating Voltage: 100-240V AC 50/60HzWi-Fi standard: 2.4GHz 802.11b/h/nStand-by power consumption: <2WOperating RF: 433.92MHZThe maximum number supported for wireless accessories: 50Material: ABSAlarm volume: 80dBWorking temperature: -20°C~+50°C (-4°F~+122°F)Working humidity: ≤85%How does it work?4. Launch the Zemguard APP, tap the add button “+” and select “Cloud SecurityAlarm System”.6. In order to setup the Zemgo Hub to your local Wi-Fi Settings, go into the ControlPage by Tapping on the added device, tap the Setting button and select " Wi-FiSetting" from the drop down list, Tap " Wi-Fi management". Here you will find a listof Wi-Fi selections, please choose your Wi-Fi router and include your Wi-Fipassword. The blue light will flash once for around 5S and then it will show thatyou have connected your Zemgo hub successfully to your Wi-Fi router.5. Tap “LAN search” and select the device ID from search result, enter devicename and password, tap the confirm button to save. The initial password is1234.Note: The initial device password is 1234, the device name isuser-definedTap the Device ID.Keep in mind that your deviceID located in this section willalso be used as the SNnumber to Sync the devicewith Amazon Alexa, so pleasemake sure that you take anote of this number. You willneed it for the amazon Alexasync on page 7.Enter device name andpassword.Fig. 2 Fig. 3Fig. 4 Fig. 5Note: Make sure the smart hub is under AP mode and yoursmartphone is connected to the smart hub during WIFI setting.Fig. 6 Fig. 7 Fig. 8Note: If your Android system’s smartphone can not make Amazon Alexa connect withSmart Alarm, please kindly complete the connection by your computer.4) There are four modes for each sensor:Normal: In arm mode, when normal sensors are triggered, systemwill alarm. In disarm mode, when normal sensors are triggered, systemwill not alarm.Home (bypass): In home mode, only normal sensor will be triggered andhome sensors will not be triggered while alarming, this will allow user tomove freely at home.24 hour: Regardlesss the system is armed or disarmed, when 24 hoursensors are triggered, system will alarm at once.Delay: In arm mode, when delay sensors are triggerd, system willalarm after the entry delay time you have set.1) The hub will recognize remote anddoorbell button automatically, theother sensors you should edit thetype after added.2) You could rename the enrolledsensor to get a user-defined alert3) You could disable/enable eachsensor anytime anywhereEdit/Delete accessoriesLong press the accessories name on your spmartphone, then you can editthe accessories’ mode, type, name, or delete the accessories.Fig. C Fig. DPairing/activate the PIR (ZEM-1005)In order to pair the PIR makesure you have removed anybattery paper from the PIR.Then you will wave your handin front of the PIR until yousee a blue light from the PIR.Once you see this, it shouldbe followed by a beepingsound from the hub thatindicates that the PIR hasbeen paired.Pairing/activate the Key Fob (ZEM-1006)In order to pair the Key Fob makesure you have removed anybattery paper from the Key Fob.Press any button on the Key Fobthen you will see a blue light comeon from the Key Fob followed by abeeping sound from the hub thatindicates that the Key Fob hasbeen paired.Pairing/activate Doorbell Transmitter(ZEM-1007)In order to pair the DoorbellTransmitter make sure you haveremoved any battery paper fromthe it. Press the button on theDoorbell Transmitter then you willsee a blue light come on from theDoorbell Transmitter followed by abeeping sound from the hub thatindicates that the DoorbellTransmitter has been paired.Method 2 (Fig. B): Start pairing mode from APP.activate the accessory andsucceeded with a beep.Add AccessoriesFig. AFig. BChange battery: anticlockwise to move and open the base cover to changethe battery.Doorbell Bell Transmitter (ZEM-1007)The smart hub will ring when the doorbell buttonis pressed, and it will push an instant alert toyour smartphone simultaneously.Installation method:APP Operation and SettingSystem settingHooting time of siren: the time that siren will hoot while alarming, the initial timeis 1 min.Arm delay: Exit delay gives you time to exit after arming.Alarm delay: Entry delay gives you time to disarm the system upon entry, beforean alarm occurs. Only the delay sensors are invalid, the non delay sensors willbe triggered normally.Timing arm/disarm: You can set up the system to arm/disarm automatically at adefined time every day.Prompt tone for remote: you can turn on/off the prompt tone while using remotecontrol.Timing arm/disarm ON/OFF: Turn on/off timing arm/disarm.Language: change the notification language.Server setting*Important: modify the setting may cause fail of pushing notification.Heartbeat time: the interval time of smart hub uploading data to server,default time is 60s.Server IP: the IP address of serverServer Por: the port of serverOther operation and settingWIFI setting: connect the smart hub WIFI.AP setting: modify the name and password of hotspot.Modify password: Modify the password of hub.Add accessoriesTurn on pairing mode, activate the sensor to send a signal to the hub, youwill hear a beep when the piaring is successful.Sharing the deviceUser could easily share the device with your loved ones by scanning theQR code.ResetPress the pairing button for 5s to reset to default setting and succeeded witha long beep. After the reset, all accessories and WIFI information will becleared.The remote control is easy to carry, it can be used to set the system toArm/Disarm/Home or activate an alarm at touch of the SOS button.You can also remote arm/disarm/bypass the system using smartphoneAPP.Arm: All zones/sensors are armedDisarm: All zones / sensors are under the disarmed status, except thezones / sensors which is under 24-hours Arm mode.Home (bypass): All the zones/sensors are armed except the home modesensors.Contact Sensor (ZEM-1004)The window/door sensor can be installed on doors, windows, and anyother objects that can open and close. The sensor transmits signals tothe control panel when a magnet mounted near the sensor is movedaway.Installation method: choose a proper way in your door/window, we suggestyou do not mount the sensor on the door/window which made of metal,because it willl interfer the signal and shorten the distance of receive thesignal. Clean up the place you want to mount the contact sensor, tear thetape.PIR Motion Sensor (ZEM-1005)The detector adopts digital logic control processing technology andintelligent analysis algorithm, effective resolution of interfering signaland human movement signal, preventing false alarm. It featuresautomatic temperature compensation, and resistance to flowtechnology, adapting to environmental and temperature change. It candetect human movement within the 6-meter cone space, suitable or halls,hallways, etc.MaintenanceThe following suggestions will help prolong the service life of the system.1. Keep this product and accessories out of children’s reach.2. Keep the product and accessories dry. Rainwater, moisture and liquidsare likely to contain minerals that will corrode electronic circuits.3. Do not use or store the system in dusty or dirty places, otherwise it maydamage the electronic components.4. Do not expose the system to high temperature. High temperatures canshorten the life of electronic components, damage batteries, and causemelting deformation of plastic parts.5. Do not store the system in cold areas. Otherwise, when the temperature ofthe alarm system rises to the normal level, moisture appears inside,damaging PCB.6. Test the system regularly and perform troubleshooting in time.7. Check the built-in batteries of accessories regularly. If the batteries arelow, replace with new ones.8. It is recommended to cut off the power if the system is not used for longtime.9. If the alarm system is covered with dirt, wipe off the dirt with soft cloth ortissue. For stains, apply diluted alkaline detergent to soft cloth, wring the clotout and wipe the product. Then, dry the product with dry absorbent cloth.Please carefullly read and strictly follow the previous suggestions. If theproduct remains faulty, you can send it to the place of purchase or authorizedmaintenance center for maintenance. We will provide help as soon aspossible.Find the WIFI hotspot emitted by the smarthub whose name starts with “SAxxx”, thedefault password is 12345678Note: After paired successfully, the smarthub will stop beepingFig. 1“Alexa, tell Blue Dog to disarm”Definition: This allows you to disarm the system using voice control.“Alexa, ask Blue Dog state”Definition: Alexa will be able to tell you what status the alarm is in. For example:" Alarmed" or "Disarmed".“Alexa, tell Blue Dog ringing”Definition: The hub will ring ding dong. This can be used to send an alert around thehouse. For example, in the morning the kids are still sleeping upstairs and it is timeto get up for school and breakfast is ready. Then the parents can use this commandto wake up the kids.“Alexa, tell Blue Dog alarming”Definition: The hub will sound an alarm. This is used like a panic button feature. Ifthere is some type of emergency, you can say this command and the alarm willsound to advise someone in the house that there is something wrong.“Alexa, tell Blue Dog to mute”Definition: This will mute the alarm. So, when you have triggered the alarm with the"Alexa tell blue dog alarm” and you want to turn off the siren, you will use this feature.Add/Delete/Edit AccessoriesSet Up Pairing on HubMethod 1 (Fig. A): Short press the pairing button on the hub to enter pairingmode,activate the accessory and succeeded with a beep.Tap WIFI setting to configurethe WIFI of the hubButton&LED indicatorLeave message hereOpen from hereInstallation method: mounting the motion sensor on the wall with the bracket andscrews,the recommended installtion height is between 1.8m to 2.7m.or just put iton the ground,table or other plat places.Mounting the doorbell push button on the outside of your doorwith the included adhesive tap |
manualsdatabase
Your AI-powered manual search engine