Zeon IN1809 CALIBRE 619 Operation Manual

Also see for CALIBRE 619: Operation manual Operation manual

Zeon IN1809 CALIBRE 619 Operation Manual Manual pdf 1 page image

Calibre 619Automatic Movement Operation ManualAutomatic watches can be used only by those who are reasonably active as the automaticwinding relies on a regular movement of the wrist. The watch must be given an initial manualwind of 8 to 10 turns and provided that it is worn on the wrist for a minimum of 8 hours eachday it will continue to function indefinitely and may be taken off the wrist for a maximum periodof 30 hours. If this period is exceeded the movement will stop and another manual wind will benecessary. It must be remembered that when worn in bed the movement of the wrist isinsufficient to operate the automatic winding.Time Stand Accuracy1) 21,600 beats per hours2) Accuracy between -30 to +30 seconds per day worn under normal conditions.Butterfly Strap Adjusting InstructionFirstly, open the butterfly buckle and then pull out the pin. Adjust the strap to the requiredlength, and then push back the pin into the correct hole. Finally, close the butterfly buckle untilit clicks into place.Page 1Water Resistance TableLevel ofWaterResistanceSuitable forEverydayuseCanwithstandaccidentalsplashingSuitable forSwimmingSuitable forPool SidedivingSuitableforsnorkellingor watersportsSuitable forhigh boarddiving or sub-aqua divingNone Yes No No No No No3 ATM(30m/100ftYes Yes No No No No5 ATM(50m/150ft)Yes Yes Yes Yes No No10 ATM(100m/300 ft)Yes Yes Yes Yes Yes NoWater resistance is not permanent. In the course of time, the gaskets of the case andcrown may become worn and reduce the water resistance of your watch. We recommendthe periodic checking.Normal Crown – always make sure it is pushed fully into caseScrew down Crown – tighten screw down crown completely to screw lock position.To maintain water –resistance crystal, crown and case must remain intactExposure to Salt WaterIf your watch is designed for sports or working in the water and it becomes exposed to saltwater or significant amounts of perspiration, it should be rinsed in fresh water and driedthoroughly with a soft dry cloth.ImportantButtons must not be operated while in contact with waterPage 2Functions- Hours- Minutes- Seconds- Date- Month- Day of the Week Dial- Inner Ring Rotating crown.- Water Resistance – Check the back of the watch and refer to the Table.Important Do not set the day & date between 06.00 PM and 06.00 AM, as this maycause damage to the movement.Instructions for setting Day, Date and Month1) To achieve an accurate day of the week setting, press button A until a day priorto the day you require is achieve i.e. if today is Wednesday then set in ontoTuesday.2) To achieve and accurate date setting pull the crown out to first position and turnthe crown anti-clockwise until a date prior to the date you required is achievedi.e. if today is the 16 th then set it onto the 15 th3) Press button B to set the correct month.Page 3Instructions for Time Setting1) Pull the crown out to Second Position and turn the crown clockwise until the dayof the week is correct. The day and date will now be corrected, now set the timebut make sure the time is set onto AM or PM.2) Finally push the crown back into normal position.Page 4Calibre 619IN1809Page 5

/ 1

Related manuals for Zeon CALIBRE 619