Zephyr AK6500 Use, Care And Installation Manual

Zephyr AK6500 Use, Care And Installation Manual Manual pdf 1 page image

WARNINGTO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS,OBSERVE THE FOLLOWING:a. Installation worka nd electrical wiring must be done by qualified person (s) inaccordance with all applicable codes and standards. Including fire-rated construction.b. Sufficient air is needed for power combustion and exhausting of gases through theflue (chimney) of fuel burning equipment to prevent back drafting. Follow the heatingequipment manufacturer’s guideline and safety standards such as those publishedby teh National Fire Protection Association (NFPA) and the American Society forHeating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local codeauthorities.c. When cuttig or drilling into wall or ceiling, do not damage electrical wiring and otherhidden utilities.d. Ducted fans must always vent to the outdoors.WARNINGTO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.CAUTIONTo reduce risk of fire and to proerly exhaust air outside - Do not vent exhaust air intosoaces within walls, ceilings, attics, crawl spaces or garages.WARNINGTO REDUCE THE RISK OF SHOCK, THIS FAN MUST BE INSTALLED WITH ANISOLATING WALL CONTROL/SWITCH.OPERATIONAlways leave safety grills and filters in place. WIthout these components, operatingblowers could catch onto hair, fingers and loose clothing.The manufacturer declines all responsibility in the event of failure to observer theinstructions given here for installation, maintenance and suitable use of the product.The manufacturer further declines all responsibility for injury due to negligence andthe warranty of the unit automatically expires due to improper maintenance.*NOTE: Please check www.zephyronline.com for revisions before doing any customwork.WARNINGTO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THISFAN WITH ANY SOLID-STATE CONTROL DEVICE.WARNINGTO REDUCE THE RISK OF FIRE< ELECTRIC SHOCK, OR INJURY TOPERSONS, OBSERVCE THE FOLLOWING:a. Use this unit only in the manner intended by the manufacturer, if you have questions,contact the manufacturer.b. Before servicing or cleaning unit, switch power off at service panel and lock panelto prevent power from being switched on accidentally. When the service disconnectingmeans cannot be locked, securely fasten a prominent warning device, such as a tag,to the service panel.CAUTIONFor general ventilating use only. Do not use to exhaust cigarette ashes, hazardousor explosive materials and vapors.WARNINGTO REDUCE THE RISK OF RANGE TOP GREASE FIRE:a. Never leave surface units unattended at high settings. Boilovers cause smokingand greasy spillovers that may ignite. Heat oils slowly on low or medium settings.b. Always turn hood ON when cooking at high heat or when flambeing food (ie:Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambe)c. Clean ventilating fans frequently. Grease should not be allowed to accumulateon fan or filter.d. Use proper pan size. Always use cookware appropriate for the size of the surfaceelement.Rev:0513