Zeva EVMS V2 Manual
Z e r o em i s s i o nV e h i c l e s A u s t r A l i Ahttp://www.zeva.com.auElectric VehicleManagement Systemv2.0The ultimate multifunctional,integrated control system for your EVIntroductionThank you for purchasing ZEVA’s Electric Vehicle Management System. The EVMS wasdeveloped to address the need for safer, more reliable and better integrated EV conversions.It combines many common functions and a range of fault detection, providing warnings ofoperating errors and automatically responding to serious faults.Instrumentation including voltage, current, power, battery charge, temperature, and•insulation integrity.Analog gauge outputs to re-use OEM fuel gauge, temp gauge and tachometer.•Battery management including cell voltage and temperature monitoring with auto-•matic response to under/over-charged batteries, and automatic pack balancing.Contactor control for management of auxiliary contactors, allowing battery pack•break-up and isolation for safety when vehicle is not in use.Optional 2-stage precharger with fault detection for soft-starting motor controllers•Detection of over 15 different operating errors/warnings.•A complete EVMS consists of a Core, usually installed in the vehicle’s engine bay,communicating over industry-standard CAN bus with a Monitor module in the vehiclecabin, and battery management modules located within your battery boxes.This manual describes the installation and operation of both the EVMS Core and EVMSMonitor devices. Please refer to documentation supplied with your BMS modules forinformation relating to those devices.Safety WarningElectric vehicles are high powered machines which involve potentially lethal voltages andcurrents. Proper precautions and electrical safety procedures should always be observed,voltages above 110VDC should be considered dangerous, and vehicles should never beworked on while power contactor(s) are engaged. Please read this manual carefully toensure correct installation and operation. If you are unsure of anything, please contact usbefore proceeding.We have endeavoured to make a safe and reliable product which performs as described,however since ZEVA has no control over the integration of its products into a vehicle, we canassume no responsibility for the final safety or functionality of the completed vehicle.It is up to the end user to determine the suitability of the products for the purpose employed,and the end user assumes all risks associated. Products should only be installed by suitablyqualified and experienced persons, and should always be used in a safe and lawfulmanner. |
Related manuals for Zeva EVMS V2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine