807134 v1.04 09.22 HydroTap Tap InstructionsUSB Connected to the Tap.Boiling out Red silicone tube from tap. Cut to length.Chilled out (BC, C) Blue silicone tube from tap,(BCS, CS) Blue JG tube from tap.Cut to length.Vent Clear silicone tube from tap. Cut tolength.Sparkling out White JG tube from tap. Cut to length.Ambient out Blue JG tube from tap. Cut to length.Command Centre connections67Zip WaterABN 46 000 578 72767 - 77 Allingham Street, Condell Park, NSW 2200Postal: Locked Bag 80, Bankstown 1885, Australia(+612) 9796 3100 | Free Call (Aust): 1800 947 827www.zipwater.comZip Water UKTrafalgar HouseRash’s Green, Dereham,Norfolk NR19 1JG0345 6 005 005 | sales@zipindustries.co.ukspecify.zipwater.co.ukCleaning and general maintenance• Wipe surfaces with a damp cloth and then wipe drywith a clean, dry cloth.IMPORTANT - For Touch-Free Wave Tap:• Do not use air-drying disinfectant sprays.• Do not use abrasives to clean the sensor lenses atthe sides, top and rear of the Touch-Free Wave Tap.• This could cause permanent malfunction and voidwarranty.ZipHydroTapInstallation instructionsTouch-Free Wave, Elite Plus, Classic Plus, ClassicB, BA, BC, BCS, CS, C5 Familiarise yourself with the tap connectionsREDboilingtube(BC,B only)BLUEChilledtube(BC, C only)CLEARVenttube(BC,B only)Boiling,Boiling chilled,ChilledUSBChilled sparklingBoilingchilled sparklingBoilingambientREDboilingtubeCLEARVenttubeUSBBLUEJGtubeWHITEJGtubeWHITEJGtubeBLUEJGtubeUSBREDboilingtubeCLEARVenttubeUSBBLUEJGtube!Visit our website to download the manualsAustralia UK