abrastar LHAU150 Operator's Manual
LHAU150LHAU1502.5 Rev 04/2020Operators InstructionsIncludes – Please Read and Comply, PartsPage, Parts List, Proper Use of Tool, WorkStations, Putting the Tool into Service, Oper-ating Instructions.ImportantRead these instructions carefully before installing,operating, servicing or repairing this tool. Keep theseinstructions in a safe accessible location.OIL DAILYOil daily for superiorperformance.Please Read and Comply1) General Industry Safety & Health Regulations, Part1910, OSHA 2206, available from: Superintendent ofDC 204022) Safety Code for Portable Air Tools, ANSI B186.1 avail-able from: American National Standards Institute, Inc.;1430 Broadway; New York, NY 100183) State and Local Regulations.Key parts of the above regulations are excerpted below.They are not intended to be inclusive. Study and com-ply with all regulations.1) TOOL INTENT – Tool shall be used only for purposesintended in its design.2) AIR SUPPLY – Test and operate tools at 90 PSIG (6.2Bar) maximum unless tool is marked otherwise. Use(FRL).3) UNUSUAL SOUND or VIBRATION – If tool vibratesor produces an unusual sound, repair immediately forcorrection.4) OPERATOR PROTECTIVE EQUIPMENT – Weargoggles or face shield whenever tool is in operation.Other protective clothing shall be worn, if necessary.SEE REGULATIONS.5) SAFETY MAINTENANCE PROGRAM – Employ asafety program to provide inspection and maintenanceof all phases of tool operation and air supply equip-ment in accordance with “Safety Code for Portable AirTools.”Safety Glasses Breathing MasksSafety Gloves Ear ProtectionRequired Personal Safety EquipmentRecommended AirlineSize - Minimum10 mm 3/8 inRecommended MaximumHose Length8 meters 25 feetOPERATOR’S MANUAL FOR12,000RPM 5 in. and 6 in.RANDOM ORBITAL SANDERSLHAU150LHAU1502.5 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine