banks iDash 1.8 Quick Start Manual

banks iDash 1.8 Quick Start Manual Manual pdf 1 page image

iDash®1.8 QUICK START GUIDE• Gauge Selection - Customize gauge layout and displayedparameters.• Data Logging** - Record and playback your parameterdata to a microSD card.• Diagnostics - Check the status of your vehicle and otherBanks Products.• Alerts- Set custom low and high warnings for anyparameters.• Min/Max Log - View minimum and maximum valuesfor set parameters.• Shift Light - Set RPM and customize background/text color.• Settings - Adjust brightness, text color, alerts, units, and more.iDASH MENU FEATURESUP buttonLong press:- Rapid scrollDOWN buttonLong press:- Rapid scroll- Start/Stop(Data Log Mode)SELECT buttonLong press:- Save and returnto Gauge ScreenBACK buttonPress:- Button Lights(Gauge Screen)- Lap/Trigger Point(Data Log Mode)Long press:- Return to Gauge ScreenGaugeSelectionDataLogging**eenMin/Max LogShift LightSettingsSystemInformationFirmwareUpdateField 1Field 2Start DatalogVehicleiDash 1.8MaximumLogMinimumLogSetParametersOn/OffSet RPMSet Shift LightBackgroundSet ShiftLight Color*Group*GroupCheck VehicleCodesClear VehicleCodesCheck EmissionsReadinessField 1LayoutDiagnosticsSelectParameters2 gauge3 gauge4 gauge5 gaugeItemItemField 2Alert 1...Alert 2BrightnessBar GraphText ColorUnitsDensitySettingEngineDisplacementResetVehicleSelectionWake UpSensitivity LevelFinal DriveCorrectionLayoutAlertsB-BusModulesStart Play BackFormat:Text/NumberTire SizeCorrection.........Field 1Field 2BackgroundAlert...*GroupAir DensityDiagnosticsEmissionsEngine Performance- AirEngine Performance- FuelPressureSpeed and VelocityTemperatureTransmissionVoltageVehicle Performance**If equippediDASH MENU TREEAll iDashes ship with a continuous min/max log that can beconfigured for any parameter. This data is always being updatedand saves between power cycles1. Select “Settings” from the main menu and thenselect “Min/Max Log.”2. Select either “Minimum Values” or “Maximum Values”to view the current Min or Max Value list.3. Select “CLEAR ALL” to reset and zero out all values.4. Use “Set Parameters” to change which sensors arebeing monitored.LOG AND VIEWMIN/MAX VALUESMax Value LogThis product is protected byU.S. Patent 7,254,477 B1U.S. Patent 7,593,808 B2

/ 2

Related manuals for banks 61423