dallmeier Semsy III VMC Touch Commissioning
Also see for Semsy III VMC Touch: Manual
  |
V1.0.0 2015-12-02 We reserve the right to technical modifications, errors and misprints. © 2015 Dallmeier electronicwww.dallmeier.comVMC Touch CommissioningInitial Installation And Configuration Of The Touch Monitor In WindowsAll trademarks identified by ® are registered trademarks of Dallmeier electronic.The Touch Monitor with the VMC Touch application extends a SeMSy® III Workstation Software with a simple and convenient multi-touch operation.Many functions of the individual modules of a SeMSy® III Workstation Software can be operated easily and intuitively on the optimized user interface bydragging, wiping, tapping, scrolling, zooming. As a result, users receive a much more flexible way of operating.For commissioning the Touch Monitor must be connected first to the required workstation. In the next step, the drivers are installed on the workstationand the Touch Monitor is defined in the Windows configuration dialog for input devices as a touch screen.ConnectionsHDMI USB 1USB 2HDMI = Micro HDMI port for image data transmissionUSB 1 = Micro USB port for touch signal and power supplyUSB 2 = Micro USB port for power supply with external charger (5V 2A)¾ Connect the micro HDMI port (type D) of the Touch Monitor with a HDMI port type A at the workstation.¾ Connect the micro USB 1 port of the Touch Monitor with an USB port type A at the workstation.For the power supply, a USB 3.0 port on the workstation is recommended. The power from the combined “USB 1” port is normally sufficient for the opera-tion of the Touch Monitor. If an external charger (5V 2A) is connected to the “USB 2” port of the Touch Monitor, it is powered exclusively through the “USB2” port and via the “USB 1” port is only transmitted the control data for the touch screen.CommissioningPower button¾ Press the Power button at the top of the Touch Monitor.The green LED indicates the operational readiness of the Touch Monitor.Driver InstallationAfter connecting the Touch Monitor to the workstation and the commissioning throug the Power button, the required drivers are automatically installedvia Windows Update.An Internet connection is required for the automatic driver installation with Windows Update.¾ Wait until the end of the driver installation. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine