daviteq CAP10CNC User Manual

Also see for CAP10CNC: Manual

daviteq CAP10CNC User Manual Manual pdf 1 page image

CAP10CNC-MN-EN-01 JUN-2020CAP10CN is industrial version of PulseCAP10, designed for industrial applications like generator, stationary fule tank infactory, building, construction site...CAP10CN has 4-20mA output or RS485/ModbusRTU output, can be connectedeasily to any industrial devices like PLC, IoT Gateway, iConnector... CAP10CN has very high accuracy 0.1% of span, canbe used for tank up to 30.000 liters volume.The technicians who install sensor, must be graduated from college of mechanic or electric.The mechanical installation staff (drill, cut, grind, etc.) must have skills in mechanical engineering.The electrical installation staff (connect, etc.) must have skills in electrical engineering.The technician must be trained before using.CAP10CNC is intended to use with Diesel Oil, Vegetable Oil.CAP10CNC must not be used with other flammable fluid such as Gasoline, Alcohol, Ethanol, Acetone, Toluene orother solvents.Be careful while drilling, cutting, grinding, etc. The fuel tank or other flammable fluid.Daviteq is not responsible for compensation in case of explosion to bodily injury or property damage.Read specifications thoroughly and make sure that its output are suitable to reading devices.Power supply must be in the permitted range.USER GUIDE FOR FUEL LEVELSENSOR CAP10CNCThis document is applied for the following products1. Introduction2. Notes3. Safety4. Note Before Installation