ebm-papst G1G170-AB05-20 Operating Instructions Manual

Also see for G1G170-AB05-20: Operating instructions

ebm-papst G1G170-AB05-20 Operating Instructions Manual Manual pdf 1 page image

G1G170-AB05-20ebm-papst Mulfingen GmbH & Co. KGBachmьhle 2D-74673 MulfingenPhone +49 7938 81-0Fax +49 7938 81-110info1@de.ebmpapst.comwww.ebmpapst.comCONTENTSOperating instructions1. SAFETY REGULATIONS AND NOTESPlease read these operating instructions carefully before starting to workwith the device. Observe the following warnings to prevent malfunctionsor physical damage to both property and people.These operating instructions are to be regarded as part of this device.If the device is sold or transferred, the operating instructions mustaccompany it.These operating instructions may be duplicated and forwarded forinformation about potential dangers and their prevention.1. SAFETY REGULATIONS AND NOTES1.1 Levels of hazard warnings1.2 Staff qualification1.3 Basic safety rules1.4 Electrical voltage1.5 Safety and protective functions1.6 Electromagnetic radiation1.7 Mechanical movement1.8 Deflagration1.9 Emission1.10 Hot surface1.11 Transport1.12 Storage1.13 Disposal2. PROPER USE3. TECHNICAL DATA3.1 Graphic rendition of products3.2 Nominal data3.3 Technical description3.4 Mounting data3.5 Transport and storage conditions3.6 Electromagnetic compatibility4. CONNECTION AND START-UP4.1 Connecting the mechanical system4.2 Connecting the electrical system4.3 Connection via plug4.4 Connection diagram4.5 Checking the connections4.6 Switch on device4.7 Switching off the device5. INTEGRATED PROTECTIVE FUNCTIONS6. MAINTENANCE, MALFUNCTIONS, POSSIBLECAUSES AND REMEDIES6.1 Cleaning6.2 Safety test111112222222333556666677779101010101111111.1 Levels of hazard warningsThese operating instructions use the following hazard levels to indicatepotentially hazardous situations and important safety regulations:DANGERIndicates an imminently hazardous situation which, if notavoided, will result in death or serious injury. Compliance withthe measures is mandatory.WARNINGIndicates a potentially hazardous situation which, if not avoided,could result in death or serious injury. Exercise extremecaution while working.CAUTIONIndicates a potentially hazardous situation which, if not avoided,may result in minor or moderate injury or damage of property.NOTEA potentially harmful situation can occur and, if not avoided, canlead to property damage.1.2 Staff qualificationOnly specialised electrical personnel may install the device, perform thetest run and work on the electrical system.Only trained and authorised specialist personnel are permitted totransport, unpack, assemble, operate or maintain the device, or to use itin any other manner.1.3 Basic safety rulesAny safety hazards stemming from the device must be re-evaluatedonce it is installed in the end device.Observe the following when working on the unit:; Do not make any modifications, additions or conversions to thedevice without the approval of ebm-papst.1.4 Electrical voltage; Check the electrical equipment of the device at regular intervals, referto chapter 6.2 Safety test.; Replace loose connections and defective cables immediately.DANGERElectrical load on the deviceRisk of electric shock→ Stand on a rubber mat if you are working on an electricallycharged device.WARNINGTerminals and connections have voltage even with aunit that is shut offElectric shock→ Wait five minutes after disconnecting the voltage at all polesbefore opening the device.Item no.: 50103-5-9970 · Revision: 70943 · Print-out: 2012-04-11 · Y. Uhlmann (VM-TDO) · Page 1 / 12ebm-papst Mulfingen GmbH & Co. KG · Bachmьhle 2 · D-74673 Mulfingen · Phone +49 7938 81-0 · Fax +49 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.comTranslation of the original operating instructions