ebm-papst R2E225-RA92-34 Operating Instructions Manual

ebm-papst R2E225-RA92-34 Operating Instructions Manual Manual pdf 1 page image

Operating instructionsR2E225-RA92-34Translation of the original operating instructionsCONTENTS1. SAFETY REGULATIONS AND INFORMATIONRead these operating instructions carefully before starting work on thedevice. Observe the following warnings to prevent malfunctions ordanger to persons.These operating instructions are to be regarded as part of the device.The device is only to be sold or passed on together with the operatinginstructions.These operating instructions may be duplicated and distributed to informabout potential dangers and their prevention.1. SAFETY REGULATIONS AND INFORMATION 1 1.1 Hazard levels for warnings11.1 Hazard levels for warningsThese operating instructions use the following hazard levels to indicatepotentially hazardous situations and important safety regulations:DANGERIndicates an imminently hazardous situation which will result indeath or serious injury if the specified actions are not taken.Compliance with the instructions is imperative.WARNINGIndicates a potentially hazardous situation which can result indeath or serious injury if the specified actions are not taken.Exercise extreme caution while working.CAUTIONIndicates a potentially hazardous situation which can result inminor or moderate injury or damage to property if the specifiedactions are not taken.NOTEA potentially harmful situation can occur and, if not avoided, canlead to property damage.1.2 Staff qualificationsThe device may only be transported, unpacked, installed, operated,maintained and otherwise used by suitably qualified, trained andauthorized technical staff.Only authorized specialists are permitted to install the device, to carryout a test run and to perform work on the electrical installation.1.3 Basic safety rulesThe safety hazards associated with the device must be assessed againfollowing installation in the final product.The locally applicable industrial safety regulations are always to beobserved when working on the device.Keep the workplace clean and tidy. Untidiness in the work areaincreases the risk of accidents.Note the following when working on the device:; Do not perform any modifications, additions or conversions on thedevice without the approval of ebm-papst.1.2 Staff qualifications1.3 Basic safety rules111.4 Voltage11.4 Voltage; Check the device's electrical equipment at regular intervals; seeChapter 5.2 Safety inspection.; Replace loose connections and defective cables immediately.DANGERElectrically charged deviceRisk of electric shock→ When working on an electrically charged device, stand on a1.5 Safety and protective features1.6 Mechanical movement1.7 Emissions1.8 Hot surface1.9 Transport22222rubber mat.21.10 Storage32. INTENDED USE3. TECHNICAL DATA3.1 Product drawing3.2 Nominal data3.3 Data according to Commission Regulation (EU) 327/20113.4 Technical description3.5 Mounting data44555663.6 Transport and storage conditions4. CONNECTION AND STARTUP4.1 Mechanical connection4.2 Electrical connection4.3 Connecting the cables4.4 Connection of the Hall IC4.5 Connection diagram4.6 Checking connections4.7 Switching on the device6667789994.8 Switching off the device95. MAINTENANCE, MALFUNCTIONS, POSSIBLECAUSES AND REMEDIES5.1 Cleaning5.2 Safety inspection1010105.3 DisposalItem no. 13368-5-9970 · ENU · Change 99669 · Approved 2018-11-26 · Page 1 / 10ASIA PACIFIC SHENGRUI LIMITEDPhone +00852 56261528info@apacshengrui.comwww.apacfan.com