MALVERN Bunk BedIMPORTANT READ CAREFULLY – RETAIN FOR FUTURE REFERENCEThank you for buying the MALVERN Bunk Bed• Please take a few quiet minutes to read these instructions• It is recommended that this product is assembled by two adults• This product contains small parts, kee p small children clear of the assembly area• Lay out the parts on a clean, flat surface and compare with the parts checklist. Saveall packaging until assembly is complete to avoid accidentally discarding fittingsPRODUCT SAFETY• All assembly fastenings should always be tightened properly and care should betaken that no fittings are loosePRODUCT CARE• Wipe clean using a soft damp cloth followed by dry cloth• Do not use abrasives or cleaning products which may contain ammonia or solvents• Take care when handling or moving the furniture. Careless handling can damagewooden furniture, try to lift rather than drag• Colour may vary due to this being a natural productTOOLS REQUIREDPAGE 1 of 6• Bunk bed or high bed should not be used if any structural part is broken or missing• Children can strangle in items such as ropes, strings, cords, harnesses and belts• WARNING !!! Children can become trapped between the bed and the wall.• WARNING !!! High beds and upper bed of bunk beds are not suitable for children• Maximum thickness of the mattress 220 mmunder six years due to the risk of injury from fallsTo avoid risk of serious injury the distance between the top of safety barrier and the wallshall not exceed 75 mm or shall be more than 230 mmattached to or hung on a bunk bed/high bed(EN 747 - 1 : 2012)