hager 2978 Installation Instructions Manual

Contents

installation instructions

hager 2978 Installation Instructions Manual Manual pdf 1 page image

2978 No-Touch Wave-To-Exit SwitchInstallation InstructionsI-EA00062Rev 1, Rev Date: 1/27/14 Always visit www.hagerco.com for the latest Installation InstructionsHAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 • (800) 325-9995INSTALLATION INSTRUCTIONSMODEL 2978 WAVE-TO-EXIT SWITCHFeatures & Applications· Device is activated with the simple wave of a hand· Designed to control electric locks/strikes, magnetic locks,or automatic door operators· Ideal for use in cleanrooms, hospitals, labs, schools, oroffices· Sensing range up to 4" (10cm)· Mounted on a durable stainless steel plate· Dual LED, illuminated sensor indicates status· Quick connect screwless terminal block for easyinstallation.NOTE:The HAGER 2978 must be mounted to a single-gang electrical back box or plaster ring.1. Unscrew the four rear cover screws. Remove the rear cover to expose the 8-positionscrewless terminal block.2. Feed the wiring through the wall to the back box. Feed the wiring through the gasketedhole of the rear cover. Verify that the wire leads are on the inside of the rear cover.3. Connect the wires onto the screwless terminal block (see page 2 for typical wiringexamples). Verify that each wire is securely terminated by gently pulling on each wire.4. Replace the rear cover of the sensor switch, and secure the four cover screws.5. Mount the stainless steel faceplate onto the back box using the two supplied screws. Becareful not to pinch any wires when mounting the device.6. Apply 12VDC power to the device. The LED indicator ring will turn RED.7. Test for proper activation by placing a hand within 4" of the sensor. The LED sensor ringwill change from RED to GREEN, and both relays will activate.Installation & OperationDimensionsNoTouchEXITScrewlessTerminal BlockConnections12/24VDCPWR Relay#1Specifications1-⅛"(29mm)2-¼"(56mm)4-½"(115mm)2-¾"(70mm)1-¾"(45mm)Side View Front View Rear ViewRear CoverRubber Gasket RingRelay#2+- NONC C NONC CtextNoTouchEXITInput VoltageCurrent @ 12VDC24VDCContact RatingLED ColorRangeStandbyActiveOutput ActivationTimeOperating Temp.WeightDimensions30mA15mA Standby 70mA35mA Active(2) Form C Relays, 3A@30VDC (Resistive)RedGreen4" (10cm) max.1 Second or as long as sensor is triggered-4deg F ~ 131deg F (-20C ~ 55C)3 oz. (85g)4.5" X 2.75" x 1.375" (mm = 115 x 70 x 35)Page 1 of 2

/ 2

Related manuals for hager 2978