Installation InstructionsSolar PIR wall light455689162FPlease familiarise yourself with the product before using it foinstructions. Include all documentation if giving the device to a third party.PARTS LIST1) Solar panel2) PIR sensor (motion detector)3) Mounting screws (2 each)4) Ambient LEDLOCATION OF THE SOLAR WALL LIGHT1. For best results the solar module should be placed in a location that receives direct sunlight and is not covered orshaded.2. Make sure the solar wall light is not subject to interference from other light sources. Otherwise, the lamp will notlight up at dusk.3. For optimal operation the solar wall light must be charged in sunny weather for a period of at least 2 – 3 days.4. When looking for a suitable location, make sure the horizontal detection range is approx. 90 degrees within a rangeof approx. 5 metres (as depicted in the following illustration).5) PIR activated LED6) Battery compartment (back side)7) AUTO / OFF switch (back side of lamp)8) Mounting eyes8712 345V60223 BX220IMKNG2048281_ONLINE.indd 1