nardi atlantic 100 Instruction Manual
Also see for Atlantic 100: Instruction manual
Instruction ManualATLANTIC 100 Page 1This manual contains operating instructions and maintenance schedules for the high pressure breathing air compressors. Operatorsmust read and understand all information inside the manual.ATTENTION. This machine can be used only after a careful reading of this instruction manual. The machine may onlyused to produce compressed air. Other use is strictly prohibited. The manufacturer and the supplier void all responsibilityfor damage or injury resulting from failure to follow these instructions.1. GENERAL INFORMATION:Before using the machine please put your attention to thisgeneral information:1. Personnel engaged to operate the machine must have read theinstruction manual before beginning work, especially the safetynotices chapter.2. Personnel may not wear long hair loose, loose clothing orjewellery, including rings.3. Keep all safety and danger notices on the unit complete and inreadable condition.4. No modifications may be made to the unit which could impairsafety without first obtaining permission from the suppliers.5. Piping must be thoroughly checked (pressure and visual inspection)by the operator at appropriate time intervals, even if no safety relatedfaults have been noticed..6. Intervals stipulated or given in the instruction manual for recurringchecks/inspections must be adhered to.7. It is absolutely essential that the workplace is appropriatelyequipped for maintenance measures.8. Work on/with the unit may only be carried out by reliable personnel.Observe the legal minimum age permissible.2. GENERAL INTRODUCTION:The ATLANTIC 100 high pressure compressors are designed tocompress air for breathing as required in diving and fire fightingapplications. The max pressure is 225 bar or 330 bar dependingon unit.The compressor unit comprises the following major assemblies:Il compressore è composto da:. Compressor block. Electric or petrol/diesel engine. Filters. Filling assembly. Protection and anti-vibration frame. Automatic condensate drain*. Electric control system**. Automatic switch on/off*. ALLUMINUM frame(*) Optional extra according to order3. COMPRESSOR PUMP UNITThe compressor block ATLANTIC 100 is used to compress air in the high pressure range up to 330 bar (4500 psi). The compressorblock is of a four stage, four cylinders design. The cylinders are arranged in the 1st stage on the left, 2nd stage on the right, 3rd and4th stage on the centre side looking from the filter side. The compressor blocks are particularly suitable for continuous operationbecause of their rugged design and the corrosion resistant intermediate filter and cooler assemblies. Smooth running is a particularfeature of this Nardi design. The moving parts of the driving gear are all equally balanced. This results in a vibration-free running. Thedriving gear is fitted with energy saving cylinder roller bearings. The upper and lower connecting rod bearings are also roller bearings.Crankcase, cylinders and heads are obtained from the gravity dies. Connecting rod are extracted from casting dies. Cylinder are in castiron inside an aluminium pipe. |
Related manuals for nardi Atlantic 100
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine