nbf Signature Series Quick Start Manual

Also see for Signature Series: Operating instructions Assembly instructions Operating instructions Assembly instructions Assembly instructions

nbf Signature Series Quick Start Manual Manual pdf 1 page image

Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and rubber mallet.800-558-1010www.NBF.comTower w/ Doors • INSTRUCTIONSCARTONS: ST3330, STD3033Parts :ST-A: Back Panel(30.25” x 28” x 1”)Quantity: 1ST-E: Left Side(15” x 31” x 1”)Quantity: 1ST-G: Top(29.5” x 15” x 1”)Quantity: 1ST-B: Shelves(28” x 13” x 1”)Quantity: 2ST-C: Center SupportQuantity: 1IMPORTANT NOTICE:Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.Check to be sure that you have all parts and hardware.Remove all wrapping materials, including staples & packing straps before you start to assemble.Do not tighten all screws/bolts until completely assembled.Keep all hardware parts out of reach of children.Any problems or questions call Regency Office Furniture at 1-866-816-9822Cam Lock Assembly:To open Cam, point arrowtoward Cam Pin hole. To lockCam, turn clockwise.Figure 1:ST-HST-EST-DDR-FST-GST-FST-H: Base(28” x 14.25” x 1”)Quantity: 1ST-F: Right Side(15” x 31” x 1”)Quantity: 1ST-D: Foot Bracket(15”D)Quantity: 2ST-CDR-E: Left Door(14” x 30” x 1”)Quantity: 1DR-F: Right Door(14” x 30” x 1”)Quantity: 1DR-ETower w/ DoorsPage 1