nedis INKI112CBK4 Quick Start Manual
Also see for INKI112CBK4: Quick start guideQuick start guideQuick start guide
                  |
a Quick start guideInsect Killer INKI112CBK4INKI112CBK6For more information see the extended manualonline: ned.is/inki112cbk4 | ned.is/inki112cbk6Intended useThe Nedis INKI112CBK4 | INKI112CBK6 is an electronic insectkiller.It utilizes a UV-A LED tube to attract light sensitive flyinginsects, such as flies, moths, and mosquitoes.These insects are electrocuted by the electrically chargedinner metal grid.The product is intended for indoor, domestic use only.Keep the product out of reach from children.Any modification of the product may have consequences forsafety, warranty and proper functioning.Main parts (image A)1 Chain ring2 Housing3 Metal grid4 UV-A LED lamp5 Power cable6 TraySafety instructions-WARNING• Only use the product as described in this manual.• Read the manual carefully before use. Keep the manualfor future reference.• Do not use the product if a part is damaged or defective.Replace a damaged or defective device immediately.• This product may only be serviced by a qualifiedtechnician for maintenance to reduce the risk of electricshock.• Do not open the product.• High voltage! Do not touch the inner metal grid.• Do not look directly into the light, this may cause eyedamage.• Never put metal objects inside the grid.• Keep distance from flammable objects.• Keep away from flammable gases, vapor or explosivedust.• Do not use the product in barns, stables and similarlocations.• Do not expose the product to water or moisture.• Always disconnect the product from the power outletbefore cleaning or moving the product.• Do not drop the product and avoid bumping.• Do not use the product for more than 8 hours a day, dueto the radiation.• Keep the product out of reach from children.Installing the product1. Hang the product with the chain ring A1 to the ceiling.2. Connect the power cable A5 to a power outlet.MaintenanceAlways disconnect the product from the power outletbefore cleaning or moving the product.Clean the outside of the product with a soft, clean, lightlydamp cloth.Empty the tray A6 at least once a week.The LED lamp A4 cannot be replaced.-Do not use cleaning solvents or abrasives.-Do not attempt to repair the product. If the product doesnot operate correctly, replace it with a new product.SpecificationsProduct Insect KillerArticle number INKI112CBK4 INKI112CBK6Grid voltage 800 - 1000 VInput voltage AC 220 - 240 V / 50 / 60 HzLamp UV-A LEDPower 3 W 4 WLifespan ± 20000 hoursEffective range 30 m 2 35 m2Cable length 1 m |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine