nedis KAMC300CGY Quick Start Manual
                |
a Quick start guideMini Chopper KAMC300CGYFor more information see the extended manual online:ned.is/kamc300cgyIntended useThis product is a chopper that chops food into smaller pieces.The product is intended for indoor use only.This product is not intended for use by persons (including children) withreduced physical, sensory or mental capabilities or lack of experience andknowledge, unless they have been given supervision or instruction concerningthe use of the product by a person responsible for their safety.Children should be supervised to ensure that they do not play with the product.This product is intended to be used in household and similar applicationssuch as: staff kitchen areas in shops, offices and other working environments;farmhouses; by clients in hotels, motels and other residential type environmentsand bed and breakfast type environments.Any modification of the product may have consequences for safety, warrantyand proper functioning.SpecificationsProduct Mini ChopperArticle number KAMC300CGYDimensions (l x w x h) 187 x 153 x 241 mmInput power 220 – 240 V ~ 50 – 60 HzMaximum power 500 WCable length 100 cmOperating time (max) 30 secondsMain parts (image A)1 Power button2 Power cable3 Motor unit4 Chopper bowl5 Chopper lid6 BladesSafety instructions- WARNING• Ensure you have fully read and understood the instructions in this documentbefore you install or use the product. Keep the packaging and this documentfor future reference.• Only use the product as described in this document.• Do not use the product if a part is damaged or defective. Replace a damagedor defective product immediately.• Do not drop the product and avoid bumping.• This product may only be serviced by a qualified technician for maintenanceto reduce the risk of electric shock.• Do not expose the product to water or moisture.• Disconnect the product from the power source before service and whenreplacing parts.• If the power cable is damaged, it must be replaced by the manufacturer, itsservice agent or similarly qualified persons in order to avoid a hazard.• Place the product on a flat, level surface.• Switch off and disconnect the product from the power source before youchange accessories or approach parts that move in use.• Misuse of this product can result in serious injury.• Be careful when handling the blades.• Mind the cutting blades during cleaning.• Mind the cutting blades when you empty the bowl.• Be careful when you pour hot liquid into the food processor or blender as itcan be ejected out of the product due to a sudden steaming.• Do not use the product for more than 30 consecutive seconds. Allow theproduct to cool down for approximately 2 minutes before using again.• Do not place the product near heat sources, this can damage the product.• Keep hair, loose clothing, fingers and all body parts away from openings andmoving parts.• Make sure the product is assembled correctly before operating to preventinjury.• Do not use force when assembling or disassembling the product, this candamage the product.• Make sure the blades have stopped rotating before removing the lid toprevent injury.Before first use1. Remove all packaging.2. Clean all parts that come in contact with food before use.4 All parts except for the motor unit are dishwasher safe.Using the product1. Place the product on a flat surface close to a power outlet.2. Put the blades A6 over the pin in the chopper bowl A4.3. Put the ingredients into A4.4 Cut large foods into smaller pieces before processing.4. Put the chopper lid A5 onto A4.5. Place the motor unit A3 on A5, aligning the pins of A3 to the notches inA5.4 The product will not operate unless the pins of A3 and notches in A5align.6. Connect the product to a power outlet.7. Hold the product with both hands on A3.8. Press and hold the power button A1 to process until the desired texturehas been reached.- Release the power button after 30 seconds of continuous use. Use theproduct maximum 5 times in a row. After 5 consecutive uses, allow theproduct to cool down to room temperature to avoid overheating.- Clean all parts that come into contact with food with hot water and dishsoap after each use.4 All parts except for the motor unit are dishwasher safe.Preparing foodFood type PreparationBreadFresh, toasted or stale1. Cut 1 slice into small pieces.2. Chop for 15 seconds.3. Wait for 1 minute.4. Repeat 2. and 3. until desired result.Fruits and vegetablesCanned, cooked or fresh1. Measure up to 120 g.2. Chop for 30 seconds.3. Wait for 1 minute.4. Repeat 2. and 3. until desired result.Herbs 1. Measure up to 120 g.2. Wash and dry thoroughly.3. Chop for 20 seconds.4. Wait for 1 minute.5. Repeat 3. and 4. until desired result.Nuts, cookies, crackers 1. Chop for 20 seconds.2. Wait for 1 minute.3. Repeat 1. and 2. until desired result.Fresh meat 1. Measure up to 210 g.2. Cut into small strips.3. Chop for 15 seconds.4. Wait for 1 minute.5. Repeat 3. and 4. until desired result.Maintenance- Do not use aggressive chemical cleaning agents such as ammonia, acid oracetone when cleaning the product.- Disconnect the product from the power source before service and whenreplacing parts.Clean the product after every use.1. Clean the motor unit with a damp cloth.2. Clean all parts that come into contact with food with hot water and dishsoap after each use.4 All parts except for the motor unit are dishwasher safe.c KurzanleitungMini-Zerhacker KAMC300CGYWeitere Informationen finden Sie in der erweiterten Anleitung online:ned.is/kamc300cgyBestimmungsgemäße VerwendungDieses Produkt ist ein Zerhacker, der Lebensmittel in kleinere Stücke zerkleinert.Das Produkt ist nur zur Verwendung innerhalb von Gebäuden gedacht.Dieses Produkt ist nicht zur Verwendung durch Personen (einschließlich Kinder)mit eingeschränkten körperlichen, sensorischen oder geistigen Fähigkeitenoder ohne ausreichende Erfahrung und Kenntnis geeignet, es sei denn, siewerden durch eine für ihre Sicherheit verantwortliche Person beaufsichtigt undeingewiesen.Kinder müssen beaufsichtigt werden, um sicherzustellen, dass sie nicht mit demProdukt spielen.Dieses Produkt ist für den Gebrauch im Haushalt und ähnlichen Umgebungenbestimmt, wie z. B. in Personalküchen in Geschäften, Büros und anderenArbeitsumgebungen; Bauernhäusern; von Kunden in Hotels, Motels undanderen Wohnumgebungen, Frühstückspensionen und dergleichen.Jegliche Modifikation des Produkts kann Folgen für die Sicherheit, Garantie undordnungsgemäße Funktionalität haben.SpezifikationenProdukt Mini-ZerhackerArtikelnummer KAMC300CGYGröße (L x B x H) 187 x 153 x 241 mmEingangsleistung 220 – 240 V ~ 50 – 60 HzMaximale Leistung 500 WKabellänge 100 cmBetriebszeit (max) 30 SekundenHauptbestandteile (Abbildung A)1 Ein/Aus-Taste2 Stromkabel3 Motoreinheit4 Zerhacker-Schüssel5 Zerhacker-Deckel6 Klingen |
Related manuals for nedis KAMC300CGY
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine