norbar 43222 Installation Manual
Also see for 43222: Operator's manual
  |
Issue 324.01.05Part Number 39303Installation Guide for 4322280 mmINSTALLATION1. Identify a suitable surface and position to mount the instrument.2. Using the template on this guide, mark the position of the 4 mounting holes.3. Drill (drill and tap) the 4 mounting holes suitable for 10.0 mm (⅜ inch) fasteners(M10; Grade 8.8 minimum; cap head type are recommended or the equivalent ⅜inch).4. Fix instrument in position using fasteners at a torque of 35 to 40 N.m (25 to 30ft.lb).5. Connect power supply (supplied) to the instrument. All display segments will lightand buzzer will sound briefly. The instrument is ready for use.WARNINGS• ENSURE THE MOUNTING SURFACE IS CAPABLE OF SUPPORTING THEINSTRUMENT WHEN 350 N.M TORQUE IS APPLIED.• ONLY USE THE POWER SUPPLY PROVIDED.• DO NOT APPLY TORQUE ABOVE 350 N.M.• NOT TO BE USED WITH IMPULSE OR IMPACT WRENCHES.www.norbar.com115 mm |
Related manuals for norbar 43222
norbar 43228 Operator's Manual
norbar T-Box 43236 Operator's Manual
norbar TWC Series Manual
norbar ISO 1500 Operator's Manual
norbar 80026 Operator's Manual
norbar TWC 400 AUTO Operator's Manual
norbar PRO-TEST 40 Operator's Handbook Manual
norbar TWL 1500 Operator's Handbook Manual
norbar Pro-Test 60 SERIES 2 Operator's Manual
norbar TTT 3 Series Operator's Handbook Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine