BSR-6157Page 1 from 4 921615700_09_003GENERALThe user have to read carefully the following instructions, in order to be properly informed and keep themfor future use.The BSR-6157 is an analogue addressable smoke detector which integrates functions of optical smokeand heat detection and it can work with any fire panel supports Olympia A Protocol. It can be adjusted todetect multiple levels of smoke and heat offering flexibility and rich functionality. Also, it integrates a shortcircuit isolation circuit which is automatically activated and disconnects the defective node from theremaining loop, allowing it to be located by the panel.The detector sends to the main panel an analogue value which depends on the concentration of smokeand heat. The value is 100 in concentration of 0.107dB/m (small amount of smoke) or a temperature ofo o57 C and increases proportionally to 120 in concentration of 0.300dB/m or a temperature of 90 C. When asudden increase in temperature is detected the detector sends the value of 121.By default the panel is set to sound an alarm when the concentration of smoke is 0.107dB/m or thetemperature is 57 C. The user can change this setting from the panel for each detector and define anylevel of smoke concentration or temperature between the lower and the upper limits, specifying thesensitivity of the system depending on the requirements of each site. Also, the user can select A1R or A2Sworking mode through the panel.They are composed by two parts. A plastic base which is placed on the ceiling and the main body of theodetector which fits on the plastic base with a simple rotation to the right. The detectors have a 360 visibleled and a remote led driver which are light up constantly in case of detection of fire, till cancelled from thepanel. Also, they are staying lit even if the sirens are silenced from the panel, so the detector whicho140μΑ11-30V DCTEMPERATURE SENSITIVITYSMOKE CONCENTRATION SENSITIVITY1A5AIP42100mΩ2.5mA (with activated LED)Adjustable from 0.107 to 0.300 in 0.010 dB/m stepsAdjustable from 57 to 90 in 1.5 stepsoC10.7 - 12.79.3 - 10.6Up to 95%ο-40 to 70 CABS/PC160 gr.103 (d) x 55 (h) mm2 yearsRemote LED driverAlarm LEDINDICATORSOUTPUTAnalogue addressable optical smoke andrate-of-rise heat detector with integrated isolatorTECHNICAL CHARACTERISTICSMAIN VOLTAGESTANDBY CONSUMPTIONALARM CONSUMPTIONMAXIMUM LOOP CURRENT (Ic max, -L in/out)MAXIMUM SWITCH CURRENT (Is max, -L in/out)MAXIMUM SERIES RESISTANCE (Zc max, -L in-out)MAXIMUM LEAKAGE CURRENTIN ISOLATION MODE (I max, -L in/out)LISOLATION VOLTAGE (Vso min-max)RECONNECT VOLTAGE (Vsc min-max)DEGREES OF COVER PROTECTIONPRODUCED IN ACCORDANCE WITHOPERATING TEMPERATURE RANGERELATIVE HUMIDITYCONSTRUCTION MATERIALSEXTERNAL DIMENSIONSTYPICAL WEIGHTGUARANTEE25mA pulses (6ms duration every 2sec)Thank you for your trust in our productsOlympia Electronics - European manufacturerEN 54-5 EN 54-7 EN 54-17, ,CLASS A1R/A2SOlympia A ProtocolCOMMUNICATION PROTOCOL