Machine components:17 985Caution: Product weighs 10.8kg,please seek assistance before lifting3Please do not connect your replacementmachine to the power until step N6The machine must be disconnected from thepower supply before continuing to the next step!1 42Remove the Meter (f)IS-300 Series BaseProduct Replacement Guide Average Time Required: 20 minutesSlide the Meter (f) towards youN1. Remove the components from your original machineMachine BaseOpen the door of the compartment situated to theleft of the Ink Cartridge (e) to reveal the Meter (f)Feed TableDisconnect the LAN Cable (c) from the left handside by pressing and holding down the clipLAN CableRemove replacement unit from box & placeoriginal unit back into box ready for collectionN2. Unpack your replacementPower Cable Ink Cartridge MeterRemovalDisconnect the Power Cable (d) from the right handside of the machineInstallationLift the top cover to reveal Ink Cartridge (e)and Meter (f) compartmentPress down on the Cartridge (e) below the word‘TOP’ until you hear a ‘click’Remove the Ink Cartridge (e) and close themachine coverRemove the Feed Table (a) by lifting the machine(b) slightly and sliding the Feed Table downwardsto unlock66