quadient iMeter IS-280 Replacement Part Manual
Also see for IS-280: Quick installation guideQuick installation guideInstallation guideInstallation guideQuick installation guide
    |
© 2011 Neopost USA Inc. All rights reserved. No part of this document may be reproduced or distributed in any form or by any means.IM | IS 280 iMeter™ Postage MeterReplacement Part Guide – PSDFor interactive step by step instructions, visit:www.neopostinc.com/280helpdesk/ (For Neopost Customers)www.haslerinc.com/280helpdesk/ (For Hasler Customers)The following steps will guide you through the removal of the PSD (Postal Security Device) andinstallation of a new PSD.Replacing The PSD PSD ComponentsThe following steps are performed when the PSDneeds to be replaced.1. Withdrawing the PSD.2. Installing the new PSD into to system.3. Returning the old PSD.4. Swapping the PSD.Withdrawing The PSD1. Press the Sleep/Wakebutton. The power indicatorlight will become green.6. Press the down arrowbutton to select“Maintenance”.Press “OK”.2. From the Homescreen,press the “MENU” button.7. Press the down arrowbutton to select“Processes”.Press “OK”.3. Press the down arrowbutton until “Supervisor” ishighlighted.8. Press “OK” to continue withthis process.4. Once “Supervisor” ishighlighted, press “OK”.9. Press the down arrowbutton to select “WithdrawPSD”.Press “OK”.5. Enter the Supervisor PINcode, “09430”.10. Press “Next” to continueto withdraw the meter(PSD).IM | IS-280iMeter™Postage MeterPSD |
Related manuals for quadient IS-280
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine