quadient iX-3 Series Quick Installation Manual

Also see for iX-3 Series: User guide User guide Quick installation guide Quick installation guide Quick installation guide

quadient iX-3 Series Quick Installation Manual Manual pdf 1 page image

iX-3 SeriesQuick Installation GuideComplete the declaration by following the steps on screen.NextInstallation ProcessPress the ‘Next’ to start theOnline servicedeclaration.MemOKInstallation Process1 LANSelect LAN and press ‘OK’ to test connection type.MemIt is recommended to follow screen prompts totest ink alignment.A C E G I KB D F H JSelect letter with arrowsand press «OK»Headset alignment AmountPostage Available$ 100.00Enter amount:$ 10MemOnce back on the home screen, press the coinsbutton and then select ‘2’ to add funds. Enter theamount and then press the white check button.Your mailing system base is now ready to use. Please turnthis sheet over for your Quick Start Guide.An online interactive installation guide is available at : kb.quadient.us/ix3_installUnpack all components from the box, remove packaging and anytransit tape.Lift the cover of the mailing system base (a) toreveal the meter (h) and ink cartridge (i) bays.Open the meter cover. Place the meter (h) into the meter bay and slide inuntil it fits securely into position. Close the meter cover.Insert the ink cartridge (i) into the ink bay with the ‘TOP’ sticker facingupwards. Push the ink cartridge (i) towards the back of the mailing systembase until you hear a ‘click’. Close the cover.mailingsystem basefeeding tableand moistener catch trayink cartridgeback of mailing system baseMailing System Components :power cable meterweighing platform (WP)weighing platform(WP) connectorLAN cableLower weighing platform release panel (tailgate) at rearof the mailing system base (a). Place weighing platform(d) on top of the mailing system base and slide forward tolock. Lift release panel and secure clip cable into place.Lift the mailing system base (a) slightly on the left hand side and align the hooks toattach the feeding table (b). Attach the catch tray (c) to the right hand side of themailing system base.Insert the WP connector (e) into the port on the rear of the mailingsystem base (a). Then connect the LAN cable (f) and power cable (g)to each side of the mailing system.Turn on the mailing system base (a) using theswitch behind the power cable (g) and follow thesteps on screen.

/ 2

Related manuals for quadient iX-3 Series