WALLMOUNT ADAPTERThis manual applies to the following products: Wallmount Adapter 100 BK, Wallmount Adapter 100 WHOpen the package with caution. Remove the adapt-ers and separate them from the protective film.UNBOXINGTo determine the positions of the holes, apply markingsto the wall in advance using the spirit level and a ruler.Position one of the adapters on the wall as an upperbracket and align it using the spirit level. Make sure thatthe upper adapter points downwards. Use a pencil tomark the drill holes.DETERMINING THE POSITIONOF THE UPPER ADAPTERThe followingequipment is required to install the adapter:✓ Spirit level ✓ Drill✓ Pencil ✓ Drill attachments✓ Screwdriver ✓ Dowels (4 × 6 mm, not included)✓ Ruler ✓ Screws (4 × 6 mm, not included)✓ Washers (not included)EQUIPMENTDepending on the nature of the wall, you may need to useplasterboard dowels instead.MOUNTING INSTRUCTIONSENUse a drill to drill the hole on the markings.DRILLING