1TBS2603AU HDMI Video Encoder/Decoder User ManualPreparations:1. Connect HDMI signal to Encoder2. Connect LAN cable to Encoder. You can connect Encoder to network switch or a Router.3. Prepare a PC/Laptop and then power on for your Encoder.DC 12V: power port. These recommended power adapters are “DC 12V/2A or 5V/2A”. DC 12V/1Aadapter is also ok.Eth: RJ.45 port, 1000M.Reset: Reset button. Press and hold it around 9 seconds and then release, reset active.After reset, IP will back to the default 192.168.1.217. And also configuration will back to thedefault.HDMI OUT: Decode and then HDMI out.HDMI IN: HDMI signal input.A-OUT: Decode and audio out. Jack 3.5mm.A-in: Extra audio in (Line in), Jack 3.5mmLED display: display basic information. Like device IP, input size, CPU consumption and ect.Encoder control: web UILogin:Default username: admin; pwd: admin