Manuals database logo
manualsdatabase
Your AI-powered manual search engine

DURKOPP ADLER 756 A manuals

756 A first page preview

756 A

Brand: DURKOPP ADLER | Category: Sewing Machine
Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. About these instructions
  7. Other documents
  8. Safety
  9. Signal words and symbols used in warnings
  10. Working basis
  11. Swiveling up the machine head
  12. Swiveling down the machine head
  13. Setting the handwheel scale
  14. Aligning the machine head
  15. Disassembling and assembling the machine head
  16. Assembling machine head
  17. Needle bar
  18. Setting the needle bar height
  19. Changing the needle holder
  20. Disassembling the needle bar linkage
  21. Assembling the needle bar linkage
  22. Switchable needle bar (class 756)
  29. Setting the needle transport
  30. hook
  31. Setting the loop stroke
  32. Setting the distance between hook tips and needles
  33. Setting the needle guard
  34. Setting the bobbin case lifter
  35. Setting the timing for opening
  36. Setting the lifting gap
  37. Setting the safety clutch
  38. Setting the torque
  39. Setting the remaining thread monitor
  40. Middle knife
  41. Assembling the drive motor
  42. Setting the middle knife
  43. Setting the thread tension spring
  44. Setting the trimming and clamping device for the needle threads
  45. Testing the function of the trimming and clamping device for the needle threads
  46. Replacing knives and thread-pulling knife
  47. Setting the thread-pulling knife to a different needle distance
  48. Converting the trimming and clamping device
  49. Setting the trimming and clamping device for the hook threads
  50. Changing the knives
  51. Setting the height of the hook thread trimmer
  52. Testing the hook thread trimmer
  53. Needle thread advancing device
  54. Setting the movement of the needle thread advancing device
  55. Changing the sewing motor
  56. Setting the folding station plate
  57. Folder
  58. Aligning the folder with the needles
  59. Aligning the folder with the middle of the pocket opening
  60. Setting the guide plates at the folder
  61. Setting the stroke movement for the folder
  62. Setting the folder detection
  63. Transport carriage
  64. Setting the front end position of the transport carriage
  65. Changing the toothed belt
  66. Setting the toothed belt tension
  67. Transport clamps
  68. Setting the height of the transport clamps
  69. Changing the transport clamps
  70. Aligning the transport clamps with the sliding plate edge
  71. Setting the distance of the transport clamps to the folder sole
  72. Setting the blowing of the piping strips
  73. Setting the transport clamp pressure
  74. Setting the programmable transport clamp pressure
  75. Automatic corner knife station (straight pocket)
  76. Setting the initial position of the corner knives
  77. Testing the initial position of the corner knives manually
  78. Testing and adjusting the corner knives electrically
  79. Aligning the corner knife station with the seams
  80. Setting the angle of the corner knife incisions
  81. Replacing corner knives
  82. Automatic corner knife station (straight/slanted pocket)
  84. Setting the piercers
  85. Setting the corner knife inclination
  91. Multi-functional corner knife station
  96. Setting the speed
  97. Setting the end position damping
  102. Changing the reference switch on the corner knife support
  103. Marking lamps
  104. Setting the stationary marking lamps
  105. Setting the programmable marking lamp vertical (optional)
  106. Light barriers
  107. Aligning the light barriers
  108. Setting the correction values for the flap
  109. Assembling the vacuum unit (optional)
  110. Endless zipper feed (optional)
  111. Setting the guide rails at the folder
  112. Setting the lifting movement of the guide plates
  113. Zipper cutter
  114. Setting the height of the zipper cutter
  115. Setting the position of knife and counter blade
  116. Setting the swivel width
  117. Setting the swivel speed of the zipper cutter
  119. Driver zipper
  120. Setting the driver zipper limit
  121. Setting the speed of the driver zipper
  122. Setting the folder height when the zipper is cut
  123. Additional equipment
  124. Tape feeder
  125. Setting the height of the tape feeder
  127. Changing the conveyor belt
  128. Setting the downholder
  129. Assembling the pocket bag clamp
  130. Stacker
  131. Assembling the pincer stacker
  132. Setting the pincer stacker
  133. Activating the pincer stacker
  134. Throw-over stacker
  135. Aligning the throw-over stacker
  136. Activating the throw-over stacker
  137. Setting the stack removal
  138. Setting the sewing material surface
  139. Setting the position of the stops
  140. Setting the stacker brackets
  141. Setting the pneumatic switch
  142. Programming
  143. service menu
  144. machine configuration
  145. pedal operation
  146. Maintenance
  147. Cleaning
  148. Lubricating
  149. Lubricating the machine head
  150. Lubricating the hook
  151. Servicing the pneumatic system
  152. Draining the water condensation
  153. Cleaning the filter element
  154. Parts list
  155. Decommissioning
  156. Disposal
  157. Troubleshooting
  158. Technical data
  159. Appendix
  160. Pneumatic diagram
Related products
756755 A755745-35-10 A7685567700745-34 -745-34-3743-422
DURKOPP ADLER categories
Sewing Machine
Sewing Machine Accessories
Other
Controller
Accessories
Scanner
More DURKOPP ADLER categories
Manuals database logo
manualsdatabase
Your AI-powered manual search engine