DURKOPP ADLER 838 manuals
838
Table of contents
- instruction manual
- general safety instructions
- Table Of Contents
- Product description
- Subclasses and sewing equipment 3.1 Subclasses
- Optional equipment
- Class-specific technical data
- Threading the needle thread
- Winding on the hook thread
- Adjusting the thread tension
- Adjusting the needle thread tension
- Adjusting the thread regulator
- Changing the needle for double-needle machines
- Sewing foot pressure
- Adjusting the stitch length
- Engaging the safety clutch for hook blockages
- Operating the machine with the positioning drive
- Automatic machine functions
- Example - operating the machine while sewing
838
Table of contents
- service instructions
- general safety instructions
- Table Of Contents
- Setting gauges
- Adjusting the handwheel
- Bottom feed 2.1 Base setting for stitch adjustment and stitch length limit
- Stitch uniformity for forwards and reverse stitching
- Adjusting the levers on the rear feed shaft
- Position of the eccentric tappet for the feed movement
- Position of the eccentric tappet and the feed dog stroke
- Switching over the feed clutch
- Position of the eccentric tappet for the switch over of the feed clutch
- Checking the switch over of the feed clutch
- Feed dog
- Top feed 3.1 Positioning the needle holder for single-needle sewing machines
- The needle feed
- Top roller
- Lifting the top roller
- Press pad for the double-needle sewing machine
- Adjusting the needle bar and the hook 4.1 Hook height
- Needle bar height, play of needle to hook tip, loop stroke
- Protection for the hook tip and loop former
- Bobbin housing lift
- Hook lubrication
- Adjusting the thread 5.1 Thread regulator, thread take-up lever, bolt for the thread lever mechanism
- Bobbin Winder
- thread trimmer
- Starting position for the thread take-up knife
- Control cam
- Bobbin thread clamp
- Electronic control and machine drive – positioning drive
838
Table of contents
- instruction manual
- general safety instructions
- Table Of Contents
- Items delivered
- General and transport packaging
- Completing the table plate and mounting to the stand
- Adjusting the working height
- Integrating the sewing machine head into the stand
- Pedal adjustment
- Assembling the knee lever and oil pump hose
- Assembling the connection cable, control panel, and diode illumination on the machine head
- Connecting the special sewing machine to the low voltage supply
- Connecting the sewing light transformer to the supply voltage
- Establishing equipotential bonding
- Connecting the sewing machine head to the sewing drive
- Adjusting the positioning drive parameters
- Adjusting the machine positioning
- Checking the set positions
- Pneumatic connections
- Sewing test
DURKOPP ADLER categories
More DURKOPP ADLER categories
manualsdatabase
Your AI-powered manual search engine