Eaton 93PR Series manuals
93PR Series
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- safety instructions
- Audience
- User Precautions
- Symbols on the UPS and Accessories
- For More Information
- INTROdUCTION
- Looking Inside the UPS System
- Figure 2-2. 93PR 25-75 kW UPS Wiring Diagram (Without Internal Battery Version)
- Figure 2-3. 93PR 25-75 kW UPS Wiring Diagram (With Internal Battery Version)
- UPS Operating Modes
- Figure 2-4. Path of Current Through the UPS in Double Conversion Mode
- Figure 2-5. Path of Current through the UPS in Energy Saver System
- Stored Energy and Battery Mode
- Bypass Mode
- UPS Features
- Variable Module Management System (VMMS)
- Figure 2-8. Two-switch MBS Electrical Connection Drawing
- Field Installed UPM
- Battery System
- Table 2-2. Standard and Optional UPS Options
- UPS INSTAllATION PlAN ANd UNPACkING
- Table 3-1. Dimensions
- Figure 3-1. UPS Cabinet Clearances. See Table 3-3
- Table 3-4. Air Conditioning or Ventilation Requirements During Full Load Operation
- UPS System Power Wiring Preparation
- Table 3-6. Minimum Recommended Multi-core Cable and Fuse Sizes
- Table 3-8. UPS Power Cable Terminations
- UPS System Interface Wiring Preparation
- Unpacking and Unloading the UPS
- Figure 3-4. Remove all Fixed Shipping Brackets and Screw Fixed on the Pallet
- Instruction for Removing the Battery Module Packaging
- UPS SYSTEM INSTAllATION
- Figure 4-1. 93PR 25-75 kW Gland Plate and Connector Locations (With Internal Battery Version)
- Figure 4-2. 93PR 25-75 kW Gland Plate and Connector Locations (Without Internal Battery Version)
- Battery System Installation
- Figure 4-5. Install the Battery Module
- Installing a Remote EPO Switch
- Installing Interface Connections
- Mini-slot Interface Connections
- Wiring Parallel 93PR UPS Systems
- Figure 4-7 . Principle of Paralleled UPS Systems
- Control Signals Overview
- Figure 4-9. Pimplified CAN and Pull-Chain Wiring for Parallel UPP System
- Figure 4-11. CAN and Pull-Chain Wiring for Parallel UPP without MOBs
- Installing Eaton Sync Control
- COMMUNICATION INTERFACES
- Mini-slots
- Figure 5-4. Relay Card-MS
- Intelligent Power Software
- UPS OPERATING INSTRUCTIONS
- Figure 6-1. UPS Switch Position
- UPS Controls and Indicators
- Status Indicators
- UPS Status Lights
- Steps to Operate the UPS
- System Control Instructions
- Starting the UPS System in Bypass Mode
- Transfer from Bypass to Double Conversion Mode
- De-energizing the Critical Load
- UPS Control Instructions
- UPS Shutdown
- Figure 6-8. UPM Module Location
- Starting the UPMs
- Using the Remote Emergency Power-off Switch
- Figure 6-9. The normal Positions of the MBS Switches and Rectifier Disconnect Switch
- Transfer UPS from Maintenance Bypass to Double Conversion Mode
- STS Module
- UPS MAINTENANCE
- Performing Preventive Maintenance
- ANNUAL Maintenance
- Maintenance Training
- TECHNICAl dATA
- UPS System Input
- UPS System Output
- Battery Specification
- UPS Environmental Specifications
- WARRANTY
- INSTAllATION CHECklIST
- APPENdIX A: USER SETTINGS
manualsdatabase
Your AI-powered manual search engine