Samsung AM053FXMDCH manuals
AM053FXMDCH
Table of contents
- Table Of Contents
- Product Specifications
- samsung electronics
- Disassembly and Reassembly
- Troubleshooting
- Error Code
- E201 communication error during tracking
- E221/231/251/269 outdoor temperature sensor error
- Low pressure temperature sensor error (Open/Short) (Error Code : E296)
- Compressor down by antifreeze control (Error Code: E403)
- Comp. down due to a protective control of high pressure (Error Code : E407)
- Comp. down due to a discharge temperature sensor of a compressor (Error Code : E416)
- Reverse phase detection error (3Phase outdoor unit) (Error Code : E425)
- ESC EEV open error (Error Code : E438)
- Refrigerant leakage error (Error Code : E439)
- Prohibition of the compressor operation due to outdoor temperature (Error Code : E440, 441)
- E458/475 outdoor unit fan error
- Comp down due to OLP temperature control (Error Code : E463)
- E461/467 compressor starting/rotation error
- Current error / PFC overload error (Error Code : E462, E484)
- E464 ipm over current error
- E466 dc-link voltage under/over error
- E554 gas leak error
- Others
- PCB Diagram
- Wiring Diagram
- Reference Sheet
- Nomenclature
- check operation
- Check Operation
- Automatic Commissioning Error Code
- Amount of Refrigerant Automatically Checking
AM053FXMDCH
Table of contents
- air conditioner
- Table Of Contents
- safety precautions
- Deciding to where to install the outdoor unit
- installation location
- when installing more than 1 outdoor unit
- Installation and base ground work for an outdoor unit
- cutting or flaring the pipes
- connecting the drain hose to the outdoor unit
- grounding work
- Setting outdoor unit option switch and key function
- pump down
- Checking lists after finishing installation
- Inspection and check operation
- check operation
- Automatic refrigerant amount detection function (Checking th amount of refrigerant)
- trial operation
AM053FXMDCH
Table of contents
- Table Of Contents
- Table Of Contents
- Precautions
- Precautions for Handling Refrigerant for Air Conditioner
- Product Specifications
- Disassembly and Reassembly
- AM060MXMDCH
- Troubleshooting
- Error Code
- Appropriate Measures for Different Symptom
- Communication error between indoor and outdoor unit (E-201)
- Communication error on all PBA within the outdoor unit C-Box communication cable error. (E-205)
- Error on outdoor temperature sensor of outdoor unit (Short or open). (E-221)
- Error on COND OUT temperature sensor of main outdoor unit (Short or open). (E-231)
- Error on discharge temperature sensor of compressor 1 (Short or open). (E-251)
- Discharge temperature sensor of compressor 1 is detached from the sensor holder on the pipe. (E-262) / Top sensor of compressor 1 is detached (E-266)
- Suction temperature sensor is detached from the sensor holder on the pipe. (E-269)
- Refrigerant leakage or error on high pressure sensor (Short or open). (E-291)
- Refrigerant leakage or error on low pressure sensor (Short or open). (E-296)
- Error on suction temperature sensor (Short or open). (E-308)
- Error on temperature sensor of double layer pipe liquid pipe(sub heat exchanger) (Short or open). (E-311)
- Error on EVI (ESC) IN temperature sensor (Short or open). (E-321)
- Error on EVI (ESC) OUT temperature sensor(Short or open). (E-322)
- Error due to operation failure of Fan1 (E-446)
- Lock error on Fan1 of outdoor unit. (E-448)
- Error due to overheated motor of outdoor unit's Fan1. (E-453)
- Error due to overheated IPM of Fan1. (E-455)
- Output current sensor error of inverter PBA 1. (E
- DC voltage sensor error of inverter PBA 1. (E-469)
- Compressor operation stop due to high pressure protection control. (E-407)
- control or refrigerant leakage. (E-410)
- Compressor operation stop due to discharge temperature protection control. (E-416)
- connection error on 3 phase input. (E-425)
- connection error on 3 phase input. (E-428)
- EVI (ESC) EEV leakage or internal leakage of intercooler or incorrect connector insertion of EVI (ESC) EEV. (E-438)
- Error due to refrigerant leakage. (E
- Heating mode restriction due to high air temperature. (E
- when air temperature is over 15°C. (E-442)
- CCH is detached. (E-445)
- Error due to operation failure of inverter compressor 1. (E-461)
- Error due to operation failure of inverter compressor 1. (E-464)
- Error due to over voltage / low voltage of inverter PBA 1. (E-466)
- Error due to overheat caused by contact failure on IPM of inverter PBA 1. (E-500)
- Outdoor Unit PCB
- Wiring Diagram
- Reference Sheet
- Nomenclatures
- Check Operation & Amount of Refrigerant Automatically Checking
- How to troubleshoot of the "Undetermined
- automatic commissioning error code
- Automatic refrigerant amount detection function (Checking th amount of refrigerant)
manualsdatabase
Your AI-powered manual search engine