National Instruments BNC-2090 manuals
BNC-2090
Table of contents
- important information
- Table Of Contents
- Table Of Contents
- Table Of Contents
- About the BNC-2090
- Optional Equipment
- Configuring Your BNC-2090
- Mode Configuration
- Power Selection Switch
- Signal Conditioning Jumpers
- Installing Your BNC-2090
- Accessory-to-Board Cabling
- Figure 2-4. Direct Connection of an MIO Board to the BNC-2090
- Figure 2-5. Connection between the DAQ Board, the
- Table 2-3. BNC-2090 Front Panel Labels
- Connecting Analog Inputs
- Connecting Ground-Referenced Signal Sources
- Connecting Analog Outputs
- Adding Signal Conditioning Components
- Figure 3-1. Disassembly of the BNC-2090
- Soldering and Desoldering on the BNC-2090
- Figure 3-2. Onboard Equivalent Circuit for DIFF Mode
- Building Lowpass Filters
- Building Highpass Filters
- Figure 3-5. Normalized Frequency Response of Highpass Filter
- Building Attenuators (Voltage Dividers)
- Figure 3-7. Attenuator for Use with Differential Inputs
- Analog Output
- Figure 3-8. DAC0OUT and DAC1OUT
- Figure 3-9. Lowpass Filter on DAC0OUT
- specifications
- Figure B-1. Switch Configurations for RSE Mode (PC-LPM-16)
Related products
D000017 Rev BFIELDPOINT CFP-CB-22 SD Card Memory Module NI 9802Single-Ended Digital Waveform Generator/Analyzer Modules NI SMB-2163FIELDPOINT CFP-CB-3FIELDPOINT CFP-CB-1NI 9795FIELDPOINT CFP-CB-4NI 9802FD-11601National Instruments categories
I/O Systems
Control Unit
Computer Hardware
Controller
Measuring Instruments
PCI Card
Data Loggers
Network Hardware
Test Equipment
Recording Equipment
manualsdatabase
Your AI-powered manual search engine