Dell Equallogic PS6000xvs manuals
Equallogic PS6000xvs
Table of contents
- configuration guide
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Introduction
- PS Series Storage Arrays
- Feature Comparison
- Controllers
- Controller Redundancy
- Firmware
- RAID Policies
- RAID 6
- RAID 10
- RAID 50
- Peer Storage Operations
- Volumes
- Volume Attributes
- Volume Features
- Snapshots
- Replication
- Clustering
- SAN Design
- Quality of Service (QoS)
- Ethernet Switches and Infrastructure
- Connecting SAN Switches in a Layer 2 Network
- Sizing Inter-Switch Connections
- Comparing Inter-Switch Connection Types
- Host Configuration Guidelines
- Multi-Path I/O
- EqualLogic iSCSI SAN Design
- Partially Redundant SAN Configurations
- Integrating 1GbE and 10GbE SANs
- M1000e Blade Chassis Integration
- Single M1000e Enclosure Integration
- M1000e Ethernet Pass-Through I/O Module
- GbE Uplink Recommendations
- Appendix A Network Ports and Protocols
- Appendix B Recommended Switches
- B.2 Recommended 10GbE Switches
- Appendix C Supported iSCSI Initiators
- C.2 Software iSCSI Initiators
- C.3 Network Interface Controllers
- Appendix D PowerConnect 54xx Switch Configuration
- D.2 Enabling the PortFast Option to Configure STP Edge Ports
- D.4 Disabling Unicast Storm Control
- D.5 Configuring Jumbo Frames
- Appendix E PowerConnect 62xx Switch Configuration
- E.2 Enabling the PortFast Option to Configure STP Edge Ports
- E.5 Configuring Jumbo Frames
- Appendix F Cisco IOS based Switch Configuration
- F.1 Enabling the PortFast Option to Configure STP Edge Ports
- F.3 Disabling Unicast Storm Control
- Related Publications
manualsdatabase
Your AI-powered manual search engine