Leeson FHP 175311PCM manuals
FHP 175311PCM
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Specifications
- Dimensions
- Figure 4. 175318PCM, 175320PCM and 175321PCM Dimensions
- Figure 5. 175322PCM and 175323PCM Dimensions
- Figure 8. 175319PCM and 175310PCM Dimensions
- Figure 9. 175311PCM Dimensions
- Installation
- Figure 10. FHP Series Drive with PCM adder board & PCM adder kit
- Mounting
- Wiring
- Shielding guidelines
- Heat sinking
- Fusing
- Speed adjust potentiometer
- Connections
- Single Voltage FHP Series Drives
- Doubler FHP Series Drives (Voltage Doubler Mode)
- Figure 14. AC Line and Fuse Connections for Doubler FHP Series Drives (Not in Voltage Doubler Mode)
- Motor connections (all FHP-series controls)
- Figure 17. Motor Connections for Three-Phase Motors
- Speed Adjust Potentiometer Connections
- Voltage Follower Connections
- Signal and Optional Switch Connections
- Figure 21. Signal and Optional Switch Connections
- Voltage or Current Follower (PCM models)
- Operation
- Voltage Doubler
- Startup
- To reverse motor direction
- Starting and stopping methods
- Enable / Disable Switch
- Line starting and line stopping
- Calibration
- Calibration Procedure Setup for 60 Hz Motors
- TORQUE LIMIT (TQ LIMIT)
- ACCELERATION (ACCEL)
- BOOST
- Calibration Procedure Conclusion
- Application Notes
- RUN/JOG switch
- Single speed potentiometer control of multiple motors
- Quick Reversing
- Troubleshooting
- Diagnostic LEDs
- TQ LIMIT LED
- Figure 30. Carrier frequency capacitor location
- Replacement Parts
manualsdatabase
Your AI-powered manual search engine