Keysight Technologies InfiniiVision MSO-X 6002A manuals
InfiniiVision MSO-X 6002A
Table of contents
- safety notices
- In This Service Guide
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Characteristics and Specifications Power Requirements
- Measurement Category
- Maximum Input Voltages
- Environmental Conditions
- testing performance
- Testing Performance Overview
- List of Test Equipment
- Conventions
- To test digital channels (MSO models only)
- When to Test
- Table 4. Equipment Required to Test Digital Channel Threshold Accuracy
- To verify DC vertical gain accuracy
- To verify dual cursor accuracy
- To verify bandwidth (-3 dB)
- To verify time base accuracy
- To verify trigger sensitivity
- Test Internal Trigger Sensitivity
- Test External Trigger Sensitivity (all models)
- Test
- Record
- calibrating and adjusting
- User Calibration
- troubleshooting
- Replaceable Parts
- If the trace display is unusual or unexpected
- Verifying Basic Operation
- To perform hardware self test
- To perform an Auto Scale on the Probe Comp signal
- To compensate passive probes
- Troubleshooting Internal Assemblies
- Flowchart for Internal Assembly Power Troubleshooting
- To check the line filter AC output
- To check the power supply DC output
- Table 19. DC output from power supply
- To check the fan power supply
- Table 20. Fan power
- To check power to the acquisition board
- Table 21. Power supplies to acquisition board (from power board J105)
- To check power to the front panel (AutoProbe) interfaces
- Exploded
- To remove the cabinet
- To remove the rear deck assembly
- Figure 20. Removing perimeter screws securing rear deck
- Figure 21. Removing rear-facing screws securing rear deck
- Figure 22. Removing cables from power board to other boards
- To remove the power supply shield
- To remove the probe power shield
- To remove the AC input shield
- To replace the battery
- To remove the acquisition board
- Figure 29. Removing cables from power board to other
- Figure 30. Acquisition board TORX T10 mounting screw
- To remove the front panel knobs
- To remove the front bezel assembly
- Figure 34. Disconnecting the keyboard
- To remove the display assembly
- Figure 36. Display assembly
- To remove the keyboard and keypad
- Figure 38. Disconnecting the speaker/microphone
- To remove the fan assembly
- To remove the power supply
- Figure 46. Removing the power
- To remove the power board
- Figure 48. Removing the power
- Ordering Replaceable
- Exchange
- Figure 50. Exploded View 1 of
- Table 23. Replaceable Parts
- safety information
Related products
InfiniiVision MSO-X 6004AInfiniiVision MSO-X 3102AInfiniiVision MSO-X 3012AInfiniiVision MSO-X 4022AInfiniiVision MSO-X 3052AInfiniiVision MSO-X 4032AInfiniiVision MSO-X 3032AInfiniiVision DSO-X 2002AInfiniiVision MSO-X 3012GInfiniiVision MSO-X 3012TKeysight Technologies categories
Measuring Instruments
Test Equipment
Control Unit
Power Supply
Portable Generator
Switch
Accessories
Adapter
Cables and connectors
Industrial Electrical
manualsdatabase
Your AI-powered manual search engine