Quatech QS-100M manuals
QS-100M
Table of contents
- warranty information
- Table Of Contents
- Table Of Contents
- I. General Information
- II. Installation
- III. Addressing Ports
- Figure 4. Examination of a serial port base address
- Figure 5. Serial port base I/O address selection switches
- IV. Interrupt Level (IRQ)
- Figure 7. Enabling the Interrupt Status Register
- V. External Connections
- Channel Output Configuration
- Figure 13. Auxiliary signal configuration jumpers
- Figure 14. Output connector configuration
- VI. Serial Port Functional Description
- Accessing the Serial Port Registers
- Interrupt Enable Register
- Figure 17. Interrupt Identification Register bit definitions
- FIFO Control Register
- Line Control Register
- Modem Control Register
- Line Status Register
- Modem Status Register
- FIFO Interrupt Mode Operation
- FIFO Polled Mode Operation
- Baud Rate Selection
- Figure 25. Divisor latch settings for common baud rates
- VIII. Troubleshooting
manualsdatabase
Your AI-powered manual search engine