ZilanSolar SR981S manuals
SR981S
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Safety information
- Overview of solar station
- Mounting the solar station
- Attention Items for solar station installation
- Connection terminal of built-in controller
- Terminal connection
- Operation manual of built-in controller
- Signal description
- Set up clock/week
- Manu structure
- Menu description
- System overview
- System description
- System 2: 1 tank + 1 solid fuel boiler
- System 3: 1 tank + T-valve to heat tank in layer
- System 4: 2 tanks controlled by pump logic
- System 5: 2 tanks controlled by thermal enegy transfer logic
- System 6: 2 tanks controlled by T-valve logic
- System 7: East/West collector array + 1 tank controlled by pump logic
- System 8: East/West collector array + 1 tank controlled by T-Valve logic
- System 9: East/West collector array + 2 tanks controlled by T-Valve logic
- System 10: 1 tank + T-valve controlled by return heating
- System 11: East/west collector array +1 tank + T-valve controlled by return heating
- System 12: Standard solar system with heat exchanger
- System 13: 2 tanks controlled by T-valve logic + T-valve for return heating
- System 14: 2 tanks controlled by pump logic + T-valve for return heating
- System 15: 2 tanks controlled by T-valve logic + heat transfer between 2 tanks
- East/west collector array with double pumps station
- Functions operation and parameters setup (user grade)
- CIRC DHW circuilation function activated /deactivated
- Functions operation and parameter setup (engineer grade)
- Access submenu
- TEMP Temperature main menu
- EMOF Maximum switch-off temperature of collector (for collector emergency close function)
- CMX Maximum limited temperature of collector (collector cooling function)
- CMN Low temperature protection of collector
- CFR frost protection temperature of collector
- REC Recooling temperature of tank
- SMX2 Maximum temperature of tank 1
- MIN1 Minmium switch-on temperature for heat transfer between tank and heat return
- MIN2 Minmium switch-on temperature for heat transfer between heat exchanger and tank
- FUN Auxiliary functions
- DVWG Anti legionnaires' function
- SFB Switch-on/off of the solid fuel boiler
- SFON Minimum switch-on temperature of tank
- PUMP1 P1 pump operation mode selection
- 8.5.3.2 DTS Standard temperature difference of pump 1 (for pump 1 speed adjustment
- RIS Gain for circulation pump 1 (for pump1 speed adjusting)
- n2MN Pump 2 speed adjustment (RPM)
- DT2S Standard temperature difference of pump 2 (for pump 2 speed adjustment )
- FTYPE Flow meter type selection
- FTYP2 Flow meter type selection
- MEDT Type of heat transfer liquid
- tRUN Intermission heating run-on time
- tSTP Intermission heating run-off time
- INTV pump Intermission function
- ISTP Pump interval run-off time
- AHO Automatical thermostat function
- BYPR Bypass function (high temperature)
- HND Manual control
- PASS Password set
- REST Recovery to factory set
- Manual heating
- Temperature checking function
- Trouble shooting
- Quality Guarantee
- Product specification
- Device matched to this pump station
manualsdatabase
Your AI-powered manual search engine