1A Profi Handels AB01122 Operating Instructions Manual
                        | |
Contents
| 
English 31. IntRoDUCtIonWe would like to congratulate you on the purchase of your airbrush gun. We appreciate your trust. That‘s why functional securityand operational safety stands on first place for us.Please read this Instruction Manual carefully and thoroughly before operating the tool to get best performance.2. In GeneRAlThe airbrush guns are developed according to the newest stand of technology, manufactured with much care and go under strictintensive controls.Make sure after unpacking that the data given on the type label match with the included operating instructions. In the case ofdoubt is not to be used. Transport damages are immediately to be reported to the package distributor on the shipping invoice andto us in written form.3. RAnGeS oF APPlICAtIonAirbrush guns can be used in:l hobbies/modelsl Bodypaintingl Fingernail paintingl cosmeticl craftwork sprayingl And much moreThe airbrush gun can be also used for providing air source for medical, environment protect, breed aquatics Indnstrial, foodIndustrial, chemical industrial, laboratory and so on.4. oPeRAtIon DIReCtoRY / tRoUBleSHootInGThe Original air hose have rubber airproof inside; the user can make the airtight by hand, and get good performance. If the airhose is not original, usually the air hose and air compressor cannot be well airproof. If the air hose should not be tight, this willaffect the auto-stop function of the compressor and the spray pattern negatively. Then turn off the compressor and check thegauge. However, 100% airtight is only effective for auto stop function air compressor. Teflon tape can be used to prevent leakage.Connect the air compressor, air hose and airbrush gun (or other air tools), plug into the mains supply, turn on the switch, and thenthe air compressor will start work. The gauge will show the max pressure, and you can adjust the working pressure by adjustingthe pressure adjustor (only for models with pressure gauge and pressure regulator).Checking the air leakage. Please do not use the air to pressure reach the max pressure (auto stop function), for the compressorsdo not have auto stop function, please turn off the switch. Then check the needle of pressure gauge, if the needle on gauge is verysteady, it is means the airtight is verv good. If the needle decline down quickly, it means there is air leakage in some place ofconnection. Please check and make it airtight. Or any small leakage will affect the performance of the compressor. (lt may lead tofrequently auto stop and auto start)A compressors maximum pressure is the highest pressure it can build up. When a connected airbrush gun is opened, it is preci-sely with this pressure that compresssed air in itially shoots out through the airbrush nozzle. In contrast, the working pressure isthe constant pressure the compressor can maintain during airbrushing. The level of this working pressure depends, on the otherhand. the nozzle diameter of the airbrush to which it is connected; the larger the nozzle diameter, the greater the amount of airwich can escape and the lower the compressor‘s working pressure.Back to Contents |
manualsdatabase
Your AI-powered manual search engine