2N Helios IP Uni Installation Manual

Also see for Helios IP Uni: Installation manual Installation manual

Contents

2N Helios IP Uni Installation Manual Manual pdf 19 page image

192N TELEKOMUNIKACE a.s., www.2n.cz®1.2.2.4 Button TagsThis subsection describes work with Button Tags in .2N® Helios IP UniTag PrintingEvery delivery includes a sheet of translucent foil, which can2N® Helios IP Unibe laser-printed. Cut the printed foil and insert the tags in the name plates.Every name plate includes a piece of foil, which can be written over manually,using a waterproof permanent marker, if necessary.Tag Inserting/Replacing Instructions1.2.3.4.2N® Helios IP Uni provides an intuitive, easy access tothe name plates. The tags are easy to insert and replaceeven without a manual. You need not remove the front paneland thus are not exposed to the risk of loss of componentswhile replacing the tags.Loosen the name plate screw using the wrenchenclosed, for example. You can open the name platewindow like a door without losing the tightened screw.Remove the used or blank name tag and insert a newtag.Close the name plate window and tighten the screwappropriately.Check the click effect of the buttons: if the button failsto click properly when pressed (when moved byapprox. 0.5 mm), the tag is too thick or thin. Makesure that the button clicks when you press it on eitherend.NoteAlways use waterproof foil (enclosed or other) for the tags. Never usepaper or ink jet printing to avoid damage due to water leakage!