-7-Electric Lock ConnectionDoor Lock Controlled with Internal Powerconnect one lock connect two locksNote:1. Electronic lock of Power-on-to-unlock type should be used.2. The door lock is limited to 12V, and holding current must be less than250mA.3. The door lock control is not timed from Exit Button(EB).4. The Unlock Mode Parameter of Monitor must be set to 0 (by default).EB*LOCKLOCK2 nd1 ST2ndEB*1STJumper position inConnect two locks2-31 2 3BUS PL S1+ S2+ S-EB*LOCKBUS PL S1+ S2+ S-Jumper position inConnect one lock2-31 2 3Door Lock Controlled with Dry ContactNote:1. The external power supply must be used according to the lock.2. Setup the Unlock Mode of Monitor for different lock types.• Power-on-to-unlock type:Unlock Mode=0 (by default)• Power-off-to-unlock type:Unlock Mode=1

code

2easy DT594 User Manual