3Com 3C13640 Installation Manual

Also see for 3040: Release note Command reference guide Supplementary guide Configuration guide Manual

3Com 3C13640 Installation Manual Manual pdf 17 page image

3Com Router 3000 ADSL2+ FamilyInstallation Guide 2. Installing the Router2-4Caution:If the PWR LED is still off after you repeat steps 2 through 4 several times.2.5 Connecting the Router to a Console Terminal2.5.1 Console cableThe console cable has an RJ45 connector at one end and a DB9 (female) connector at the otherend.AAFigure 2-3 Console cable assembly2.5.2 Connecting the console cableFollow these steps to connect the router to a console terminal:Step 1: Select a console terminal.The console terminal can be either a standard ASCII terminal with an RS-232 serial interface ormore commonly, a PC.Step 2: Connect the console cable.Power off the router and the console terminal, and then connect the RS-232 serial port on theconsole terminal to the console port on the router using the console cable.Verify the connection and power on the router. In normal cases, the startup information is displayedon the terminal screen.