3Com 3CR13500 Software Install Manual

Also see for 3CR13500: Hardware and Software Users Guide

Contents

3COM Security Switch 6200 Applications Software Installation2-2 Installing the CheckPoint FireWall-1 NG FP3 andNG AI Software Onto Your System4 To install FireWall-1, enter the following commands:rpm -i CPshrd-50-03.i386.rpmrpm -i CPfw1-50-03.i386.rpm5 Untar and install hotfixes. Refer to the Check Point website for the latesthotfixes.6 Run cpconfig and step through the Firewall-1 configuration. For SecureXL,answer “yes”. The VPN acceleration driver is automatically installed if anaccelerator card is installed.For further information about the Check Point FireWall-1 installation, referto the Check Point FireWall-1 documentation.Installing theCheck PointFireWall-1 NG AISoftwareTo download the Check Point FireWall-1 NG AI software onto your system,complete the following.NOTE: Steps 2, 3, and 4, of the following procedure may have already beenperformed by manufacturing.1 Log into your system as root.2 Locate the file app-firewallng-AI-x.x.x.x.7xCOS.i686.rpm 1 and execute thefollowing command at the root prompt:[root@xxxxx rpm]# rpm -i app-firewallng-AI-x.x.x.x.7xCOS.i686.rpmYou must now install the application as specified by CheckPoint. The vendor files have been copied to /usr/os/apps/CPFW-1_5_0.3 Change to the /usr/os/apps/ directory, using the following command:cd /usr/os/apps/CPFW-1_5_0The following rpms and hotfixes are contained in this directory:CPdtps-50-04.i386.rpmCPfw1-50-04.i386.rpmCPrtm-50-04.i386.rpmCPshrd-50-04.i386.rpm4 To install FireWall-1 NG AI, complete the following:rpm -i CPshrd-50-04.i386.rpmrpm -i CPfw1-50-04.i386.rpm5 Run cpconfig and step through the Firewall-1 NG AI configuration. ForSecureXL, answer “yes”. The VPN acceleration driver is automaticallyinstalled if an accelerator card is installed.For further information about the Check Point FireWall-1 NG AI installation,refer to Check Point FireWall-1 NG AI documentation.1 Refer to the 3COM Security Switch 6200 Product Release Notes for the correct software version and rpm filename.