Wireless 41■ 64-bit WEP (see page 42)■ WPA (with RADIUS Server) (see page 43)Select the required value from the drop down list, and press Apply.Disabled In this mode, wireless transmissions will not be encrypted, and will bevisible to everyone. However, when setting up or debugging wirelessnetworks it is often useful to use this security mode.WPA-PSK (no server) Figure 26 WPA-PSK (no server) ScreenWPA (Wireless Protected Access) provides dynamic key changes andconstitutes the best security solution. In a wireless network where not alldevices support WPA, WEP (Wired Equivalent Privacy) should be used.1 Enter the pre-shared key in the Pre-shared Key (PSK) field. The pre-sharedkey is a password, in the form of a word, phrase or series of letters andnumbers. The key must be between 8 and 63 characters long and caninclude spaces and symbols.Note that each client that connects to the network must use the samekey.2 Click Apply.
