14 CHAPTER 1: P RODUCT I NTRODUCTIONIntroduction to theSwitch 4210 FamilyNon-PWR ModelsThis section describes each Switch 4210 Family model.Switch 4210 9-port Front panelThe Switch 4210 9-port model provides eight 10/100Base-TX autosensingEthernet ports, one 10/100/1000Base-T autosensing Ethernet port, one100/1000Base-X SFP port, and one Console port. The SFP port and the10/100/1000BASE-T autosensing Ethernet port form a Combo port. For theCombo port, either the SFP port or the 10/100/1000BASE-T Ethernet port can beused at a time.Figure 10 shows the front panel of the Switch 4210 9-port model.Figure 10 The Switch 4210 9-port model’s front panel.1000 Mbps uplink portactive LEDACT BLINKING The port is in the active state andthere is traffic on the port.OFF The port is in the active state butthere is no traffic on the port.Table 5 The 1000 Mbps uplink port status LED on 4210 PWR modelsLEDMark on thepanel Status Description(1) 10/100Base-TX autosensing port Speed LED (green)(2) 10/100Base-TX autosensing port (3) Combo port Speed LED (green)(4) 10/100/1000Base-T autosensing port (5) Console port(6) 100/1000Base-X SFP port (7) Link/Act LED (green)(8) Power LED (PWR)(1) ( 2) ( 4)(5)(6)( 7)(8)(3)(7)
