3Com AirConnect 9550 Quick Start Manual

Also see for AirConnect 9150: Product guide User guide Overview User manual

Contents

61Regulatory InformationThe 3Com AirConnect 9550 11n 2.4+5GHz PoE Access Point (WL-605) / 3Com AirConnect 9150 11n 2.4GHzPoE Access Point must be installed and used in strict accordance with the manufacturer’s instructions asdescribed in the user documentation that comes with the product.This product contains encryption. It is unlawful to export out of the U.S. wi thout obtaini ng a U.S. ExportLicense.This product does not contain any user serviceable components. Any unauthorized product changes ormodifications will invalidate 3Com’s warranty and all applicable regulatory certifications and approvals.Only antennas specified for your region by 3Com can be used with this product. The use of external amplifiers ornon-3Com antennas may invalidate regulatory certifications and approvals.This product can be used with the following antennas and accessories:CAUTION: E XPOSURE TO RADIO F REQUENCY RADIATIONThis device generates and radiates radio-frequency energy. In order to comply with FCC radio-frequencyexposure guidelines for an uncontrolled environment, this equipment must be installed and operated whilemaintaining a minimum body to antenna distance of 20 cm (approximately 8 in.).The installer of this radio equipment must ensure that the antenna is located or pointed such that it does notemit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainablefrom Health Canada’s website www.hc-sc.gc.ca/rpb.This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End usersmust follow the specific operating instructions for satisfying RF exposure compliance. This equipment should beinstalled and operated with minimum distance 20 cm between the radiator and your body.This product must maintain a minimum body to antenna distance of 20 cm. Under these conditions this productwill meet the Basic Restriction limits of 1999/519/EC [Council Recommendation of 12 July 1999 on the limitationof exposure of the general public to electromagnetic fields (0 Hz to 300 GHz)].US — R ADIO FREQUENCY REQUIREMENTSThis device must not be co-located or operated in conjunction with any other antenna or transmitter.This device is for indoor use only when using channels 36, 40, 44 or 48 in the 5.15 to 5.25 GHz frequency range.High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. Theseradar stations can cause interference with and/or damage this device.Item Description Restrictions— Supplied antenna3CWE591 3Com 6/8dBi Dual-Band Omni Antenna Must be used with 3CWE586 and one ofthe following: 3CWE580, 3CWE581 or3CWE582.3CWE596 3Com 18/20dBi Dual-Band Panel Antenna Must be used with 3CWE586 and one ofthe following: 3CWE580, 3CWE581 or3CWE582.3CWE598 3Com® 8/10dBi Dual-Band Panel Antenna Must be used with 3CWE586 and one ofthe following: 3CWE580, 3CWE581 or3CWE582.3CWE580 3Com Ultra Low Loss 6-Foot Antenna Cable Must also use 3CWE586. Cannot be usedwith supplied antenna or 3CWE501.3CWE581 3Com Ultra Low Loss 20-Foot Antenna Cable Must also use 3CWE586. Cannot be usedwith supplied antenna or 3CWE501.3CWE582 3Com Ultra Low Loss 50-Foot Antenna Cable Must also use 3CWE586. Cannot be usedwith supplied antenna or 3CWE501.3CWE586 3Com RSMA to SMA 6-inch Antenna Cable Required for all external antennas, exceptthat supplied with the AP and 3CWE501.i