3Com Fast EtherLink 3C515-TX User Manual

Also see for Fast EtherLink 3C515-TX: Release note

Contents

3Com Fast EtherLink 3C515-TX User Manual Manual pdf 38 page image

4-6 C HAPTER 4: I NSTALLING THE NDIS N ETWORK D RIVER6 Remove the DOS LAN Services Disk 1 diskette andinsert the EtherDisk diskette.The next menu displays the 3Com Fast EtherLink ISA NIC.Additional menus will appear.7 Select the appropriate options for your networkenvironment and complete the installation.Refer to the IBM documentation if you have questionsabout these menus.8 After completing the installation, copy 3C515.DOSfrom the EtherDisk diskette to C:\NET.9 Reboot the PC.The NDIS 2 driver installation is complete.OS/2 LAN ServerOS/2 must be already installed on your PC. To install theNDIS 2 driver, follow these steps:1 Open an OS/2 prompt.2 Insert the LAN Server MPTS (Multi-ProtocolTransport Services) Disk 1 diskette into your floppydisk drive.3 Make that drive your current drive and type:a:install [Enter]4 Click OK.5 Click Install.6 Select a target drive and then click OK.The default drive is C.7 Insert MPTS Disk 2 when prompted and click OK.8 Click OK when the MPTS installation is complete.9 Click Configure.10 Select LAN Adapters and Protocols and thenselect Configure.11 Select Other Adapters and then click OK.