3Com OfficeConnect 3CRWE454A72 User Manual

Also see for OfficeConnect 3CRWE454A72: Installation guide Technical brief

Frequently Asked Questions 53Ensure that one of your computers has a copy of the new software imagefile stored on its hard disk or available on CD-ROM.The latest software is available on 3Com’s Web site at:www.3com.com.1 Remove power from the Access Point and connect the admin computerto the LAN port.2 Run the Discovery application included on the product CD.3 This will connect you to the Microcode Recovery utility in the AccessPoint.4 Follow the on-screen instructions. Enter the path and filename of thesoftware image file.5 When the upload has completed, the Access Point will restart, run theself-test and, if successful, resume normal operation. The Alert LED willgo out.6 Reconnect your Access Point to your network.If the Access Point does not resume normal operation following theupload, it may be faulty. Contact your supplier for advice.Frequently AskedQuestionsHow do I reset the Access Point to Factory Defaults?See “Forgotten Password and Reset to Factory Defaults” onpage 50.How many wireless clients does the Access Point support?A maximum of 128 wireless clients are supported.There is a single LAN ports on the Access Point. How are additionalcomputers connected?You can expand the number of connections available on your LANby using hubs, switches and wireless access points connected tothe Access Point. 3Com wireless access points and OfficeConnecthubs and switches provide a simple, reliable means of expandingyour network; contact your supplier for more information, or visit:http://www.3com.com/