3Com U.S. Robotics 56K Voice User Manual

Also see for U.S. Robotics 56K Voice: User guide Command reference User's guide and reference User's guide and reference User guide

Contents

3Com U.S. Robotics 56K Voice User Manual Manual pdf 78 page image

Technical Reference72 56K Voice Faxmodem Internal - User’s GuideFax Commands+FCLASS=n Sets the mode of operationFCLASS=0 Data modeFCLASS=1 Group 3 Facsimile Service Class 1modeFCLASS? Displays the current FCLASS mode(See mode descriptions above)+FCLASS=? Displays the FCLASS mode options(See mode descriptions above)+FTS=n Stops the fax transmission. Then the modem waits fora specified time before OK appears on screen. Thepause is set in 10 millisecond intervals. n is the numberof 10 millisecond intervals that pass before OK appears.(n=0-255)+FRS=n Makes the modem wait for a specified length of silencebefore sending OK to the screen. The pause is set in10millisecond intervals. n is the number of 10 millisecondintervals that pass before OK appears.(n=0-255)Note: This command terminates with OK when eitherthe specified amount of silence is detected or when theuser types anything (which is ignored).+FTM=n Transmits data using the modulation specified byn.(n = 3, 24, 48, 72, 96, 97, 98, 121, 122, 145, or 146)Note: See the “Screen Messages” table at the end ofthis section for an explanation of messages that appearin response to this command.+FRM=n Receives data using the modulation specified byn.(n = 3, 24, 48, 72, 96, 97, 98, 121, 122, 145, or 146)Note: See the “Screen Messages” table at the end ofthis section for an explanation of messages thatappear in response to this command.

/ 81

Related manuals for 3Com U.S. Robotics 56K Voice