3Com V7122 Installation Manual

Also see for VCX V7122: Product guide Installation guide User manual User guide User guide guide

3Com V7122 Installation Manual Manual pdf 51 page image

Updating the Auxiliary FilesThe auxiliary files are configuration dat files that are loaded to the gateway (in addition to theini file) to enable enhanced gateway provisioning. Table 13 presents a brief description ofthe ini file and the auxiliary files that are available: CAS, Voice Prompts, and Call ProgressTones (CPT). For information about additional auxiliary files, see the V7122 Digital GatewayUser Guide.Table 13 ini and Auxiliary Files DescriptionsFile Type Descriptionini Load this file to provision the V7122 gateway parameters. The Embedded Web Serverenables practically full device provisioning but customers may occasionally requirenew feature configuration parameters in which case this file is loaded.Note that loading the ini file only provisions parameters that are contained in the ini file.If a parameter is not specified in the ini file, values associated with that parameter arereset to a default value. These values may not be the same as the values that wereconfigured for the VoIP gateway at the time of manufacture.Note: After the file has completed loading, the VoIP gateway automatically restarts(software is loaded from the flash).CAS Up to eight different CAS files containing specific CAS protocol definitions.These files are provided by 3Com to support various types of CAS signaling.Voice Prompts The voice announcement file contains a set of Voice Prompts to be played by theV7122 gateway during operation on Call Agent request.Call Progress Tones This is a region-specific, telephone exchange-dependent file that contains the CallProgress Tones levels and frequencies that the VoIP gateway uses. The default CPTfile is: U.S.A.Prerecorded Tones The dat PRT file enhances the gateways capabilities of playing a wide range oftelephone exchange tones that cannot be defined in the Call Progress Tones file.User Information The User Information file maps PBX extensions to IP numbers. This file can be used torepresent PBX extensions as IP phones in the global IP world.To load an auxiliary file via the Embedded Web Server, follow these 6 steps:1 Open the Auxiliary Files screen (from the Software Update menu, click Load AuxiliaryFiles); the Auxiliary Files screen is displayed (shown in Figure 26).2 Click Browse that is in the field for the type of file you want to load.3 Navigate to the folder that contains the file you want to load.4 Click the file and click Open; the name and path of the file appear in the field next to theBrowse button.5 Click the Send File button adjacent to the field that contains the name of the file you wantto load. An asterisk in the screen section indicates that the file’s loading takes effect on-the-fly (for example, Voice Prompts file).6 Repeat Steps 2 through 5 for each file you want to load.V7122 Digital Gateway Installation Guide 51