3Com WL-549 User Manual

Contents

3Com WL-549 User Manual Manual pdf 17 page image

3Com Wireless 11g PCI Adapter172. Select Add under the Preferred networks selection box.The Wireless Network Properties dialog box appears as shown in figure 15.Figure 13: Wireless Network Properties dialog box3. Uncheck the box “The key is provided for me automatically”.4. Verify that the Network Authentication is set to WPA-PSK.5. Verify that the Data Encryption is set to TKIP or AES.6. Input the Network Key of your Access Point, Wireless Broadband Routeror Wireless Router.Note: A 8 – 63 character alphanumeric key-phrase is necessary when using theWPA/WPA2 interface. WPA/WPA2 does not require HEX or ASCII notationcommon with WEP keys. Your WPA/WPA2 enabled device should already have a8 – 63 character alphanumeric key-phrase. Consult the information asked for inSection 3.2.7. Input the Network Key a second time into the “Confirm network key” box.8. Select OK.You are returned to the Wireless Network Connection Properties dialog box and are ableto verify your connection.