3Com WL-560 User Manual

Also see for 3CRWE675075 - 11a/b/g Wireless LAN Workgroup Bridge: User guide Quick start guide

Contents

3Com WL-560 User Manual Manual pdf 53 page image

Using the Configuration Management System 47Viewing ConnectionStatusUnder System Summary, click Connection Status to view a summary of theBridge’s current connection information. See Table 8 on page 27 for details.Viewing SystemSummaryUnder System Summary, you can view the following information:Click Refresh to update the information.Table 14 System Summary PageProperty Description Default ValueDevice Name The name assigned to the Bridge. You canchange the default name to one of yourchoice by clicking System Properties underSystem Configuration.3Com WWBDevice Location If you use the default device name, enteringthe location is optional.NoneCountry Code The Country Code determines the availablechannels and transmission power levelbased on regulatory restrictions in thecounty where the Bridge is installed.VariesTransmit Power The level of transmission power (100%,50%, 25%, 12%, or Min).You can change this setting by clickingWireless Network under System Configuration.100%MAC Address The MAC address of the Bridge. N/ASerial Number The serial number of the Bridge. N/AFirmware Version The version of firmware the Bridge iscurrently using.N/ADHCP Client Determines if the Bridge obtains itsIP address from the DHCP server on thenetwork.OnIP Address The IP address of the Bridge. You canchange this address by clicking IP Networkunder System Configuration.VariesSubnet Mask The subnet mask address of the Bridge.You can change this address by clicking IPNetwork under System Configuration.VariesData Preamble The data preamble setting (Short [Enhancedperformance] or Long [Wi-Fi Interoperable]).To change this setting, click WirelessNetwork under System Configuration.LongSystem Up Time The elapsed time since the Bridge booted up. Day 0, 0:00:00Date Manufactured The date the Bridge was manufactured. N/A